Bykski
PNY GeForce RTX 5090 AIO Liquid Cooler, Bykski B-FRD-PNY5090, 360 mm
360 mm GPU liquid cooling for the PNY GeForce RTX 5090
The Bykski B-FRD-PNY5090 is a 360 mm all-in-one liquid cooler for the PNY GeForce RTX 5090 32GB GDDR7 with the PCB shown below. Its full-cover block replaces the card’s stock air cooler and transfers heat from the GPU, memory, and power stages to a case-mounted radiator. An inline pump circulates coolant through the connected tubing.
Compatibility
- ✓PNY GeForce RTX 5090 32GB GDDR7 with the pictured PCB layout
Match your card’s component positions and mounting holes to the PCB photo before ordering.
Design Highlights
A 360 mm radiator with an inline pump
The block and aluminum radiator are connected by braided tubing. The pump sits in the tubing between the block and radiator.
Nickel-plated copper with jet microchannels
The T2 copper cold plate takes heat from the GPU through thermal paste and from the memory and power stages through thermal pads. Coolant flows through 0.3 mm microchannels in the block.
Key Specifications
| Series model | B-FRD-PNY5090 |
|---|---|
| Cooling layout | Full-cover GPU AIO with backplate and inline pump |
| Cold plate | Electroless nickel-plated T2 copper |
| Copper thermal conductivity | 401 W/(m·K) for the copper |
| Cold plate microchannels | 0.3 mm, up to 44 channels |
| Coolant contact area | 13,453.91 mm² (manufacturer figure) |
| Block dimensions | 233.66 × 121.62 × 17 mm |
| Radiator material | Aluminum |
| Radiator class | 360 mm |
| Standard 360 assembly | 396 mm long and 63 mm thick with the fans mounted |
| Inline pump specifications | 7,000 RPM, 450 L/h flow, 7 m head |
| Tubing | Braided |
Which Version Do I Need?
Choose the cooler by PCB layout first, then by the number of cards you plan to cool.
What's in the Box
The standard -360 layout has one GPU block and three radiator fans. The -360-H layout has two GPU blocks sharing one radiator.
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
Installation & Use
You will also need GPU thermal paste and installation tools. Before taking the card apart, confirm the thermal pads and mounting hardware needed for your kit.
FAQ
Can I fit this cooler to any RTX 5090?
Choose by PCB layout. Bykski lists the PNY GeForce RTX 5090 32GB GDDR7 board shown in Compatibility. Compare your PCB with the photo before ordering.
Do I need to buy a separate water pump or radiator?
The radiator and inline pump are part of the AIO. The tubing connects them to the GPU block.
Will it fit my case?
Look for a 360 mm radiator mount and check the space for the assembly and tube routing. The standard -360 radiator and fans measure 396 mm long and 63 mm thick together.
What does -360-H mean?
It identifies the thick-radiator 360 mm version for two matching PNY cards. Its two blocks share one radiator.
- Dry-fit the block and compare the mounting holes before tightening the hardware.












