• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

RTX 5090 AIO Cooler (360 mm) for Select Gigabyte 5090 / 5090 D 32G | Bykski B-FRD-GV5090DWF

stars, based on ( 0 ) review
items available
Contact Us
FormulaMod Official Store
Bykski · B-FRD-GV5090DWF

360 mm GPU liquid cooling for Gigabyte RTX 5090 and 5090 D

The Bykski B-FRD-GV5090DWF is an all-in-one liquid cooler for select Gigabyte GeForce RTX 5090 and 5090 D 32G cards. Its full-cover GPU block replaces the stock air cooler and carries heat from the GPU, memory, and power stages to a case-mounted radiator. Both the single-card and dual-card 360 mm kits ship with the tubing connected and the loop filled with coolant.

Fits
Select Gigabyte RTX 5090 / 5090 D 32G
Radiator class
360 mm
Cold plate
Copper
Pump
Inline with the tubing

Compatibility

For these Gigabyte PCIe cards

  • ✓Gigabyte GeForce RTX 5090 GAMING OC 32G
    GV-N5090GAMING OC-32GD
  • ✓Gigabyte GeForce RTX 5090 D GAMING OC 32G
    GV-N509DGAMING OC-32GD
  • ✓Gigabyte GeForce RTX 5090 D WINDFORCE 32G
    GV-N509DWF3-32GD

Verify your exact card model and compare its PCB layout and mounting holes with the board shown before ordering.

Bykski B-FRD-GV5090DWF PCB reference photo for the supported Gigabyte cards

PCB reference from Bykski

Design Highlights

Bykski B-FRD-GV5090DWF single-GPU kit with a block, inline pump, tubing, and three radiator fans

Inline pump and prefilled loop

The standard 360 mm kit links the block and fan-cooled radiator with braided tubing, with the pump in the tubing. Both kits ship with the tubing connected and the loop filled with coolant.

Bykski B-FRD-GV5090DWF cold plate illustration showing the closely spaced cooling channels

Copper cold plate

The copper cold plate transfers heat into the coolant through 0.3 mm jet microchannels, with up to 56 channels in the block.

Bykski B-FRD-GV5090DWF radiator viewed from above with the black fin stack exposed

Aluminum radiator

The radiator has 12 coolant channels. For either kit, check the 63 mm depth of the radiator and fans when measuring the mounting position.

Key Specifications

Model familyB-FRD-GV5090DWF
Cold plateCopper
Block dimensions261.99 × 137.51 × 17 mm
Radiator materialAluminum
Standard 360 mm radiator length396 mm
360 mm radiator thickness (both kits)38 mm
Single-card 360 mm radiator with fans63 mm thick
Dual-card 360 mm radiator with fans63 mm thick
Radiator fans (both kits)3 × 120 mm, 25 mm thick each
Pump speed7,000 RPM
Pump flow specification450 L/h
Pump head specification7 m
Bykski B-FRD-GV5090DWF block dimension drawing with face and edge views

GPU block dimensions in millimeters (manufacturer drawing)

Which Version Do I Need?

Match the entire model name on the card label, including D, OC, and memory size. The RTX 5090 D v2 is a 24 GB model. Use the 32G compatibility list above for this kit.

B-FRD-GV5090DWF-360THIS PAGE
Choose the standard 360 mm kit to convert one supported graphics card.
B-FRD-GV5090DWF-360-H
Choose this 360 mm kit for a two-card setup. Check both PCBs and confirm radiator clearance before ordering.

What's in the Box

B-FRD-GV5090DWF-360: 1 full-cover GPU block and 1 dedicated backplateB-FRD-GV5090DWF-360-H: 2 full-cover GPU blocks and 2 dedicated backplatesBoth kits: 1 × 360 mm radiator, 3 fans, pump and connected tubing, and thermal pads

Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.

Installation & Use

1
Allow 63 mm for the radiator and fans in either kit, and plan the tubing route. The manufacturer illustrates a top-mounted radiator.
2
Power down, remove the graphics card and its stock cooler, and clean off the old thermal material.
3
Apply thermal paste to the GPU die and fit the included thermal pads to the memory and power stages shown in the diagram.
4
Align the block with the PCB mounting holes and secure it with a matching mounting hardware set. Stop if the holes do not line up. Fit the included backplate according to the manufacturer's instructions.
5
Mount the radiator, route the tubing without sharp bends, and connect the pump and radiator fan leads using the appropriate headers. Confirm that the pump and fans run at startup.

Use a case with a matching radiator mount. Have a screwdriver and your own GPU thermal paste ready before installation.

Bykski B-FRD-GV5090DWF PCB diagram showing the thermal pad positions and thermal paste on the GPU

Gray strips mark the memory and power-stage pads. The center square shows the GPU paste area.

FAQ

How does an RTX 5090 AIO cooler work?

The full-cover block replaces the stock air cooler on a supported card. It transfers heat from the GPU, memory, and power stages to coolant that flows to the radiator.

Do I need a separate pump or reservoir?

Both the -360 and -360-H include a pump and arrive with the tubing connected and coolant already in the loop. You can install either kit without a separate pump or reservoir, and there is no coolant to add before installation.

How much radiator clearance do the two kits need?

Both kits need 63 mm of depth (38 mm radiator plus 25 mm fans). For the single-card kit, allow for the radiator’s 396 mm actual length. Check for space to route the tubing.

How do I check a WINDFORCE card for fit?

Match your card label to Gigabyte GeForce RTX 5090 D WINDFORCE 32G (GV-N509DWF3-32GD), then compare your board with the PCB reference.

Where do the thermal pads go?

Use thermal pads on the memory and power stages marked in the installation diagram. Apply thermal paste to the GPU die.

Notes
  • For any questions, please contact customer service.

FormulaMod Official Store

Recent Reviews
+