• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

XFX Mercury RX 9070 XT OC Gaming Full-Cover Water Block with Backplate | Bykski A-XF9070XTOC-X

stars, based on ( 0 ) review
€133.25 piece
items available
Contact Us
FormulaMod Official Store
Bykski · A-XF9070XTOC-X

GPU water block for the XFX Mercury RX 9070 XT OC

The Bykski A-XF9070XTOC-X is a full-cover GPU water block for the XFX Mercury Radeon RX 9070 XT OC Gaming 16GB. It replaces the stock cooler and cools the GPU core, memory, and voltage regulators through a custom liquid cooling loop. The kit includes a black aluminum backplate and 5V addressable lighting.

Fits
XFX Mercury RX 9070 XT OC Gaming
Ports
G1/4
Lighting
5V ARGB
Backplate
Included

Compatibility

Bykski lists one card layout for this block.

  • ✓XFX Mercury Radeon RX 9070 XT OC Gaming 16GB GDDR6

Not compatible:

  • ✗Cards with a different PCB layout

Before ordering, confirm the exact card model and compare its PCB mounting holes and component layout with the board diagram below.

Bykski A-XF9070XTOC-X compatibility reference showing the XFX Mercury Radeon RX 9070 XT OC Gaming with its stock cooler

XFX product image showing the card with its stock cooler. Verify fit against the PCB.

Key Specifications

ModelA-XF9070XTOC-X
Cooling coverageGPU core, memory, and voltage regulators (VRM)
Cold plateCopper
TopClear PMMA acrylic
BackplateBlack aluminum, outside the coolant path
Port threadG1/4
Lighting5V ARGB (RBW) via a 3-pin motherboard header
Block (L × W × T)233.9 × 136.68 × 25.65 mm
Backplate (L × W × T)233.9 × 106.73 × 6.00 mm
Bykski A-XF9070XTOC-X clear water block beside its black backplate

Choose by graphics card

Bykski A-XF9070XTOC-XTHIS PAGE
For the XFX Mercury RX 9070 XT OC Gaming 16GB PCB listed above.
For the Sapphire METAL Radeon RX 9070 XT 16GB PCB.

What's in the Box

1 × full-cover GPU water block1 × aluminum backplateMounting screws and washersThermal pads1 × ARGB sync cable2× G1/4 stop plugs

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Remove the graphics card's stock cooler and clean old thermal material from the GPU and contact areas.
2
Apply the thermal pads to the memory and VRM areas marked in red. Apply your own thermal paste to the GPU die, shown in blue.
3
Align the block and backplate with the PCB and secure them with the mounting hardware. Tighten evenly.
4
Connect the block to your loop using G1/4 fittings.
5
Leak-test the loop before powering the graphics card.

You also need a pump, radiator, G1/4 fittings, tubing, and coolant.

Bykski A-XF9070XTOC-X installation diagram with thermal pad areas in red and the GPU die in blue

Bykski installation diagram.

FAQ

Does the water block come with a backplate?

Yes. The black aluminum backplate is included and sits outside the coolant path.

Can I use a 12V RGB header?

Use the sync cable with a 5V 3-pin ARGB header. A 12V RGB header can damage the lighting.

Will this fit any RX 9070 XT?

Fit is specific to the listed XFX Mercury RX 9070 XT OC Gaming PCB. Check the exact card model and PCB layout before ordering.

Notes
  • 4. We are not responsible for any damage caused during the use of this product. Please use it at your own risk.
  • The copper plate of the water block is machined by a CNC machine tool. Machining marks and slight unevenness on the copper plate are normal and do not affect the use of the water block. Please note this.

FormulaMod Official Store

Recent Reviews
+