Bykski
XFX Mercury RX 9070 XT OC Gaming Full-Cover Water Block with Backplate | Bykski A-XF9070XTOC-X
GPU water block for the XFX Mercury RX 9070 XT OC
The Bykski A-XF9070XTOC-X is a full-cover GPU water block for the XFX Mercury Radeon RX 9070 XT OC Gaming 16GB. It replaces the stock cooler and cools the GPU core, memory, and voltage regulators through a custom liquid cooling loop. The kit includes a black aluminum backplate and 5V addressable lighting.
Compatibility
Bykski lists one card layout for this block.
- ✓XFX Mercury Radeon RX 9070 XT OC Gaming 16GB GDDR6
Not compatible:
- ✗Cards with a different PCB layout
Before ordering, confirm the exact card model and compare its PCB mounting holes and component layout with the board diagram below.

XFX product image showing the card with its stock cooler. Verify fit against the PCB.
Key Specifications
| Model | A-XF9070XTOC-X |
|---|---|
| Cooling coverage | GPU core, memory, and voltage regulators (VRM) |
| Cold plate | Copper |
| Top | Clear PMMA acrylic |
| Backplate | Black aluminum, outside the coolant path |
| Port thread | G1/4 |
| Lighting | 5V ARGB (RBW) via a 3-pin motherboard header |
| Block (L × W × T) | 233.9 × 136.68 × 25.65 mm |
| Backplate (L × W × T) | 233.9 × 106.73 × 6.00 mm |
Choose by graphics card
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
You also need a pump, radiator, G1/4 fittings, tubing, and coolant.
FAQ
Does the water block come with a backplate?
Yes. The black aluminum backplate is included and sits outside the coolant path.
Can I use a 12V RGB header?
Use the sync cable with a 5V 3-pin ARGB header. A 12V RGB header can damage the lighting.
Will this fit any RX 9070 XT?
Fit is specific to the listed XFX Mercury RX 9070 XT OC Gaming PCB. Check the exact card model and PCB layout before ordering.
- 4. We are not responsible for any damage caused during the use of this product. Please use it at your own risk.
- The copper plate of the water block is machined by a CNC machine tool. Machining marks and slight unevenness on the copper plate are normal and do not affect the use of the water block. Please note this.









