Bykski
RX 7900 XT Reference GPU Water Block with Backplate | Bykski A-RX7900XT-X
Full-cover water block for the Radeon RX 7900 XT reference PCB
The Bykski A-RX7900XT-X replaces the stock cooler on the AMD Radeon RX 7900 XT reference PCB. Its copper cold plate transfers heat from the GPU core, memory, and voltage regulators into a custom liquid cooling loop. The block has a clear acrylic top and comes with a black aluminum backplate.
Compatibility
Match your card to the AMD reference PCB layout.
- ✓AMD Radeon RX 7900 XT 20GB (AMD reference PCB)
Not compatible:
- ✗AMD Radeon RX 7900 XTX (reference PCB)
- ✗Radeon RX 7900 XT with a non-reference PCB
Before ordering, check the full model name and compare the component layout and mounting holes with the PCB photo in the product gallery.
Design Highlights
Full-cover copper cold plate
The cold plate picks up heat at the GPU core, memory, and voltage regulators. Coolant carries that heat to the radiator in your loop.
Jet microchannels over the GPU core
Coolant passes through the fine channels in the cold plate above the GPU core.
Clear acrylic with 5V lighting
The clear top leaves the coolant channels visible. The included ARGB strip uses a 5V 3-pin connection.
Key Specifications
| Model | A-RX7900XT-X |
|---|---|
| Cold plate | T2 copper |
| Top | Clear acrylic |
| Backplate | Black aluminum |
| Cooling coverage | GPU core, memory, and VRM |
| Inlet and outlet thread | G1/4 |
| Lighting connector | 5V 3-pin ARGB (Bykski RBW) |
| Water block (L × W × T) | 263.65 × 137.06 × 23.15 mm |
| Backplate (L × W × T) | 263.65 × 106.77 × 6.00 mm |
Which Version Do I Need?
Start with the full name on your graphics card. Each of these blocks has its own PCB fit list.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
Your loop also needs a pump, radiator, G1/4 fittings, tubing, and coolant.
FAQ
Will this block fit an RX 7900 XTX?
No. A-RX7900XT-X fits the AMD Radeon RX 7900 XT reference PCB. Check your exact XTX model for a matching block.
Will it fit a partner-brand RX 7900 XT?
Confirm that your card uses the AMD reference PCB. Compare the board layout and mounting holes with the photo in the product gallery before ordering.
Does it come with a backplate?
Yes. One black aluminum backplate is included.
Can I connect the lighting to a 12V RGB header?
Use a 5V 3-pin ARGB header. A 12V 4-pin RGB header can damage the LED strip.
Which fittings do I need?
Use G1/4 fittings that match your tubing. Two G1/4 stop plugs are included for unused ports.
- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.
- The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.













