Bykski
RX 7800 XT Water Block with Backplate — Bykski A-RX7800XT-X for AMD Reference and XFX MERC 319
Radeon RX 7800 XT full-cover water block
The Bykski A-RX7800XT-X is a full-cover GPU water block for the AMD reference Radeon RX 7800 XT and the XFX MERC 319 model listed below. It replaces the stock cooler and routes heat from the GPU core, memory, and power delivery components into a custom liquid cooling loop. An aluminum backplate is included.
Compatibility
Bykski lists these PCB layouts for this block.
- ✓AMD Radeon RX 7800 XT (reference PCB)
- ✓XFX Speedster MERC 319 Radeon RX 7800 XT Black Edition (RX-78TMERCB9)
Check your exact graphics card model and PCB layout before ordering.
Design Highlights
One cold plate for the core, memory, and VRMs
A copper cold plate covers the GPU die, memory, and voltage regulators. Coolant passes through jet microchannels in the cold plate to carry heat into the loop.
Aluminum backplate
The black aluminum backplate mounts behind the graphics card PCB, outside the coolant path.
5V addressable lighting
The clear acrylic top shows the ARGB lighting. For motherboard control, use a 5V 3-pin ARGB header with a matching adapter cable if your strip has a native Bykski plug.
Key Specifications
| Model | Bykski A-RX7800XT-X |
|---|---|
| Cold plate | Copper |
| Top | Clear acrylic |
| Backplate | Black aluminum |
| Coverage | GPU core, memory, and VRMs |
| Port thread | G1/4 inlet and outlet |
| Water block (L × H × T) | 254.07 × 136.71 × 22.86 mm |
| Backplate (L × H × T) | 253.96 × 106.69 × 6.00 mm |
| Lighting | 5V ARGB (RBW), 3-pin motherboard header |
Which Version Do I Need?
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
For the rest of the loop, use a pump, radiator, coolant, tubing, and G1/4 fittings sized to your tubing.
FAQ
How do I check whether my XFX MERC 319 fits?
Look for the Radeon RX 7800 XT Speedster MERC 319 Black Edition, model RX-78TMERCB9. Confirm the exact model number and PCB before buying.
What fittings does the water block take?
Use G1/4 fittings that match your tubing. Seal any unused ports with the included plugs.
Which motherboard header should I use for the lighting?
Check the LED strip plug first. If it uses a native Bykski plug, use a matching 5V ARGB adapter cable to the motherboard's 5V 3-pin ARGB header. A 12V 4-pin RGB header can damage the LEDs.
Can I use this block as a standalone cooler?
The block runs in a custom loop with a pump, radiator, coolant, tubing, and fittings.
- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.













