• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

RX 6900 XT / RX 6800 XT Red Devil GPU Water Block, Bykski A-PC6900XT-X for PowerColor

stars, based on ( 0 ) review
€133.25 piece
items available
Contact Us
FormulaMod Official Store
Bykski · A-PC6900XT-X

GPU water block for PowerColor RX 6900 XT / 6800 XT

The Bykski A-PC6900XT-X replaces the stock cooler on supported PowerColor Radeon RX 6900 XT and RX 6800 XT cards. Its copper cold plate transfers heat from the GPU core, memory, and voltage regulators to a custom liquid cooling loop. The block includes an aluminum backplate and 5V addressable RGB lighting.

Fits
Red Devil and select Red Dragon PCBs
Port Thread
G1/4
Lighting
5V 3-pin ARGB

Compatibility

Match the exact PowerColor card and PCB layout.

  • ✓PowerColor Radeon RX 6900 XT Red Devil (AXRX 6900 XT 16GBD6-3DHE/OC)
  • ✓PowerColor Radeon RX 6800 XT Red Devil (AXRX 6800 XT 16GBD6-3DHE/OC)
  • ✓PowerColor Radeon RX 6800 XT Red Dragon, matching PCB without the raised cylindrical capacitors in the outlined areas

Not compatible:

  • ✗PowerColor Radeon RX 6800 XT Red Dragon PCB with raised cylindrical capacitors in the outlined areas

For Red Dragon, compare the capacitor locations in the photos. For Red Devil, see the RX 6900 XT layout reference below. Before ordering, verify the entire PCB on your exact card.

Bykski A-PC6900XT-X fit comparison showing two bare PowerColor RX 6800 XT Red Dragon boards with capacitor areas outlined in red

FormulaMod’s Red Dragon PCB photos. Compatible board above, incompatible board below.

Design Highlights

Bykski A-PC6900XT-X manufacturer drawing with the coolant route highlighted through the cold plate and terminal

Bykski coolant path illustration.

Coolant path through the cold plate

Coolant flows through 0.5 mm jet microchannels above the GPU core. The cold plate also contacts the memory and voltage regulators through thermal pads.

Bykski A-PC6900XT-X black aluminum backplate with mounting holes and ribbed edges

Separate aluminum backplate

The included black backplate mounts behind the PCB and stays outside the coolant path. The front of the block has a clear acrylic cover.

Bykski A-PC6900XT-X PowerColor RX 6900 XT PCB drawing showing mounting holes and component locations

Bykski RX 6900 XT PCB drawing.

PowerColor Red Devil PCB reference

Bykski’s drawing shows the RX 6900 XT layout. Compare the mounting holes and the component locations where the cold plate contacts your card.

Key Specifications

ModelA-PC6900XT-X
CoverageGPU core, memory, and voltage regulators
Cold plateCopper
CoverClear acrylic
BackplateBlack aluminum
Port threadG1/4
Jet microchannels0.5 mm
Block (L × W × T)264.71 × 150.43 × 23.51 mm
Backplate (L × W × T)264.81 × 120.29 × 6 mm
Lighting5V 3-pin addressable RGB (RBW)
Bykski A-PC6900XT-X front and side dimension drawings of the water block and backplate

Bykski dimensions in millimeters. Water block above, backplate below.

Which Version Do I Need?

Match your board to the listing for your exact card.

Bykski A-PC6900XT-XTHIS PAGE
Choose this block for a PowerColor Red Devil or Red Dragon PCB listed above.
Check this model for an AMD reference-design RX 6900 XT or RX 6800 XT.
Choose this version for the PowerColor Red Devil RX 7900 XTX 24GB after checking its PCB.

What's in the Box

1 × full-cover GPU water block1 × backplate2 × G1/4 stop plugs1 × 5V ARGB stripThermal padsMounting hardware set

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Power off the PC, remove the card, and remove its stock cooler. Clean off the old thermal materials and check that the mounting holes line up.
2
Place thermal pads on the memory chips and VRM MOSFETs at the block’s raised contact points. Keep the inductors clear and apply your own thermal paste to the GPU die.
3
Align the block, card, and backplate. Fit the gaskets and screws as shown and tighten the spring screws gradually in a diagonal pattern.
4
Connect the loop with G1/4 fittings. Follow the inlet and outlet marks on the block and close unused ports with the supplied stop plugs.
5
To control the strip from your motherboard, connect it to a 5V 3-pin ARGB header through a compatible 5V ARGB adapter cable. Align the arrow on the cable’s motherboard end with the 5V pin. You can also use a 5V controller compatible with Bykski RBW.
6
Leak-test the loop with the graphics card unpowered.

Connect the block to a custom loop with G1/4 fittings, matching tubing, coolant, a pump, and a radiator. A reservoir is commonly used for filling and bleeding.

Bykski A-PC6900XT-X numbered installation drawing showing the block, pads, graphics card PCB, backplate, and mounting hardware

Bykski mounting diagram. 1 Water block · 2 Thermal pad strips · 3 Your card’s PCB · 4 Gaskets · 5 Spring screws · 6 Backplate · 7 Backplate screws.

FAQ

How can I tell if my RX 6800 XT Red Dragon fits?

Match the entire PCB to the upper photo. The compatible board has no raised cylindrical capacitors in the outlined areas.

How does Liquid Devil differ from Red Devil?

PowerColor’s RX 6800 XT and RX 6900 XT Liquid Devil cards come with a factory-installed water block. Use the compatibility list above to match your exact card.

What fittings go on this block?

Use G1/4 loop fittings. Follow the inlet and outlet marks on the block and seal the unused openings with the two included stop plugs.

How do I connect the ARGB strip?

Use a compatible 5V ARGB adapter cable for the motherboard’s 5V 3-pin ARGB header, or connect the strip to a 5V controller compatible with Bykski RBW. A 12V 4-pin RGB header can damage the strip.

Notes
  • This is a repair or replace only item. Returns not accepted on compatibility issues or if block has had water/fluid run through it.
  • Manufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item.
  • Not responsible for any damage caused by or when using this product. Please use at your own risk.

FormulaMod Official Store

Recent Reviews
+