• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Barrow

MSI RTX 5090 D 32G Ventus 3X/OC Full-Cover Water Block | Barrow BS-MSV5090-PA

stars, based on ( 0 ) review
€115.51 piece
items available
Contact Us
FormulaMod Official Store
Barrow · BS-MSV5090-PA

Full-cover water block for MSI RTX 5090 D Ventus 3X

The Barrow BS-MSV5090-PA is a full-cover water block for the MSI GeForce RTX 5090 D 32G Ventus 3X and its OC version. It replaces the stock cooler so your custom loop can cool the GPU core, memory, and power delivery components. The block pairs a copper cold plate with a clear acrylic top.

Fits
RTX 5090 D Ventus 3X / OC
Port thread
G1/4
Lighting
5V 3-pin ARGB
Backplate
Black or white

Compatibility

Barrow lists these exact graphics card models.

  • ✓MSI GeForce RTX 5090 D 32G Ventus 3X OC
  • ✓MSI GeForce RTX 5090 D 32G Ventus 3X
  • ✓INNO3D GeForce RTX 5090 D Dark Knight X3 (Yaoye X3)

Before ordering, confirm the exact model on your card and check that its PCB matches the layout Barrow specifies.

Barrow BS-MSV5090-PA compatibility photos of the MSI Ventus 3X OC, MSI Ventus 3X, and INNO3D Dark Knight X3 RTX 5090 D graphics cards

Barrow’s card photos. From left to right, MSI Ventus 3X OC, MSI Ventus 3X, and INNO3D Dark Knight X3.

Design Highlights

Barrow BS-MSV5090-PA front view through the clear acrylic top, showing the coolant path and port terminal

Cooling across the board

The cold plate sits against the GPU core and reaches the memory and power delivery contact areas. Coolant carries heat away through the channels under the clear acrylic top.

Barrow BS-MSV5090-PA close-up illustration of the parallel jet microchannels

Jet microchannels over the GPU

Barrow’s design drawing specifies 10 mm copper stock with a nickel-plated finish. Barrow specifies up to 43 jet microchannels to increase the surface area in contact with coolant.

Barrow BS-MSV5090-PA clear water block illuminated in purple and blue

LRC2.0 addressable lighting

The integrated lighting shines through the clear top. For motherboard control, use a compatible Barrow LRC2.0 adapter cable, sold separately.

Key Specifications

ModelBS-MSV5090-PA
Cold plateCopper
Top coverClear acrylic
BackplatePassive aluminum alloy
Block dimensions (L × W × max. thickness)214.60 × 146.51 × 24.20 mm
Inlet and outlet threadG1/4
LightingBarrow LRC2.0 · 5V 3-pin ARGB via adapter
Backplate finishesBlack (-BK) or White (-WT)
Barrow BS-MSV5090-PA dimension drawing showing the face, terminal, and side profile

Barrow’s dimension drawing. Measurements are in millimeters.

Which Version Do I Need?

Choose the block by your graphics card’s exact model and PCB layout.

Barrow BS-MSV5090-PATHIS PAGE
Choose this block for a Ventus 3X, Ventus 3X OC, or Dark Knight X3 listed above.
Check this block if you have an MSI RTX 5090 D 32G Suprim, Suprim Liquid, or Vanguard model.

What's in the Box

1 × full-cover GPU water block1 × aluminum alloy backplate2 × G1/4 stop plugs1 × mounting hardware setThermal pad set

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Barrow BS-MSV5090-PA black aluminum backplate with vent slots and mounting holes

The backplate comes in the color you select. The black version is shown.

Installation & Use

1
Power off the system and remove the graphics card. Disconnect the stock fan cable as you remove the cooler, then clean off the old thermal materials.
2
Cut and place the thermal pads according to the Barrow diagram. Apply a thin layer of your own thermal paste to the GPU core.
3
Align the water block, PCB, and backplate. Secure them with the mounting hardware in the positions shown in Barrow’s guide.
4
Connect the loop with G1/4 fittings. Identify the inlet and outlet before routing the tubing, and seal the unused ports with the stop plugs.
5
For motherboard lighting control, use a compatible LRC2.0 adapter cable and a 5V 3-pin ARGB header. Keep the lighting cable away from 12V 4-pin RGB headers.
6
Fill the loop and check it for leaks with the graphics card unpowered.

You also need a pump, reservoir, radiator, coolant, tubing, and G1/4 fittings sized for your tubing.

Barrow BS-MSV5090-PA thermal pad placement drawing with three numbered pad thicknesses on the cold plate

Barrow’s pad map. ① 1.2 mm · ② 0.5 mm · ③ 1.0 mm. Cut the pads to match the marked areas.

FAQ

Is this a universal RTX 5090 water block?

This block fits the specific PCB layouts in the compatibility list. Check your exact model and PCB before ordering.

Does it fit the MSI Ventus 3X OC?

Barrow lists the MSI GeForce RTX 5090 D 32G Ventus 3X OC. Check the full model name and PCB layout on your card.

Is there a white version?

Yes. Choose White (-WT) for a white backplate or Black (-BK) for a black backplate. Both colors have a clear acrylic top and addressable lighting.

Which fittings do I need?

Use G1/4 fittings sized for your tubing. Buy the tubing fittings separately.

Can I connect the lighting to my motherboard?

Yes, with a compatible Barrow LRC2.0 adapter cable and a 5V 3-pin ARGB header. The adapter cable is sold separately.

Notes
  • This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
  • The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
  • Not responsible for any damage caused by or when using this product. Please use it at your own risk.

FormulaMod Official Store

Recent Reviews
+