Barrow
Gigabyte RTX 4080 16GB GPU Water Block with Backplate | Barrow BS-GIG4080-PA
Full-cover water block for Gigabyte RTX 4080 16GB cards
The Barrow BS-GIG4080-PA Aurora replaces the stock cooler on select Gigabyte GeForce RTX 4080 16GB cards. Its copper cold plate transfers heat from the GPU core, memory, and power delivery components to the coolant in a custom loop. The block uses G1/4 ports and includes an aluminum backplate.
Compatibility
Barrow lists these five Gigabyte GeForce RTX 4080 16GB models.
- ✓Gigabyte AORUS GeForce RTX 4080 16GB MASTER
- ✓Gigabyte GeForce RTX 4080 16GB GAMING OC
- ✓Gigabyte GeForce RTX 4080 16GB EAGLE OC
- ✓Gigabyte GeForce RTX 4080 16GB EAGLE
- ✓Gigabyte GeForce RTX 4080 16GB AERO OC
Before ordering, verify the exact card model and PCB layout. The product gallery includes Barrow’s GAMING OC PCB photo. Contact FormulaMod support if your board differs or the PCB revision is unclear.
Design Highlights
Clear acrylic top and G1/4 ports
The clear acrylic top exposes the coolant path over the full-cover cold plate. The inlet and outlet take G1/4 fittings.
43 jet microchannels
The microchannels expose more of the cold plate’s surface to coolant. Each groove is 0.5 mm wide.
Addressable lighting
Barrow’s LRC 2.0 strip lights the acrylic top with individually addressable LEDs. Choose the motherboard sync cable or manual controller when ordering.
Key Specifications
| Model | BS-GIG4080-PA |
|---|---|
| Cold plate | Copper |
| Top | Clear acrylic |
| Cooling coverage | GPU core, memory, and power delivery components |
| Microchannels | 43 channels, 0.5 mm groove width, 0.3 mm interval |
| Backplate | Passive aluminum alloy, black or white |
| Port thread | G1/4 |
| Width across terminal | 151 mm |
| Maximum thickness shown | 23.8 mm |
| Lighting | LRC 2.0 5V ARGB |
| Motherboard sync header | 5V 3-pin ARGB via sync cable |
Which Version Do I Need?
What's in the Box
Choose a black or white backplate with either a motherboard sync cable or a manual lighting controller.
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
You also need G1/4 fittings matched to your tubing, a pump, a radiator, tubing, and coolant.
FAQ
Does it fit the Gigabyte RTX 4080 16GB AERO OC?
Barrow lists the Gigabyte GeForce RTX 4080 16GB AERO OC. Verify the exact card model and PCB before ordering.
What fittings does the water block take?
Use G1/4 fittings matched to your tubing. The kit includes two G1/4 stop plugs. Order the tubing fittings separately.
Which motherboard header works with the sync cable?
Connect the sync cable to a 5V 3-pin ARGB header. Never connect it to a 12V 4-pin RGB header.
Is the backplate cooled by the loop?
The included aluminum backplate is passive. Coolant flows through the front water block.
- 2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- 3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- 4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.













