• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Barrow

Gigabyte RTX 4080 16GB GPU Water Block with Backplate | Barrow BS-GIG4080-PA

stars, based on ( 0 ) review
items available
Contact Us
FormulaMod Official Store
Barrow · BS-GIG4080-PA

Full-cover water block for Gigabyte RTX 4080 16GB cards

The Barrow BS-GIG4080-PA Aurora replaces the stock cooler on select Gigabyte GeForce RTX 4080 16GB cards. Its copper cold plate transfers heat from the GPU core, memory, and power delivery components to the coolant in a custom loop. The block uses G1/4 ports and includes an aluminum backplate.

Fits
Select Gigabyte RTX 4080 16GB cards
Cold plate
Copper
Port thread
G1/4
Lighting
5V ARGB

Compatibility

Barrow lists these five Gigabyte GeForce RTX 4080 16GB models.

  • ✓Gigabyte AORUS GeForce RTX 4080 16GB MASTER
  • ✓Gigabyte GeForce RTX 4080 16GB GAMING OC
  • ✓Gigabyte GeForce RTX 4080 16GB EAGLE OC
  • ✓Gigabyte GeForce RTX 4080 16GB EAGLE
  • ✓Gigabyte GeForce RTX 4080 16GB AERO OC

Before ordering, verify the exact card model and PCB layout. The product gallery includes Barrow’s GAMING OC PCB photo. Contact FormulaMod support if your board differs or the PCB revision is unclear.

Barrow BS-GIG4080-PA compatibility photo showing the Gigabyte RTX 4080 16GB GAMING OC with its three-fan stock cooler

Barrow’s photo of the Gigabyte RTX 4080 16GB GAMING OC with its stock cooler.

Design Highlights

Barrow BS-GIG4080-PA water block showing the acrylic top, coolant path, and G1/4 terminal

Clear acrylic top and G1/4 ports

The clear acrylic top exposes the coolant path over the full-cover cold plate. The inlet and outlet take G1/4 fittings.

Barrow BS-GIG4080-PA close-up of the cold plate microchannels

43 jet microchannels

The microchannels expose more of the cold plate’s surface to coolant. Each groove is 0.5 mm wide.

Barrow BS-GIG4080-PA acrylic water block lit in blue and magenta

Addressable lighting

Barrow’s LRC 2.0 strip lights the acrylic top with individually addressable LEDs. Choose the motherboard sync cable or manual controller when ordering.

Key Specifications

ModelBS-GIG4080-PA
Cold plateCopper
TopClear acrylic
Cooling coverageGPU core, memory, and power delivery components
Microchannels43 channels, 0.5 mm groove width, 0.3 mm interval
BackplatePassive aluminum alloy, black or white
Port threadG1/4
Width across terminal151 mm
Maximum thickness shown23.8 mm
LightingLRC 2.0 5V ARGB
Motherboard sync header5V 3-pin ARGB via sync cable
Barrow BS-GIG4080-PA dimension drawing with top and side views of the water block

Barrow’s drawing shows a 151 mm width and side measurements of 23.80 mm and 22.80 mm.

Which Version Do I Need?

Barrow BS-GIG4080-PATHIS PAGE
Choose this block for one of the five Gigabyte RTX 4080 16GB cards listed above after checking its PCB.
Check this block for ASUS ROG Strix or TUF Gaming RTX 4080 16GB cards, including the OC versions.

What's in the Box

1 × full-cover GPU water block1 × aluminum backplate in your selected color2 × G1/4 stop plugs1 × mounting hardware setThermal pad set

Choose a black or white backplate with either a motherboard sync cable or a manual lighting controller.

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Power off the PC and remove the graphics card. Disconnect the stock cooler’s fan cable, remove the cooler, and clean off the old thermal materials.
2
Cut and place the thermal pads using Barrow’s diagram. Apply your own thermal paste to the GPU die.
3
Align the water block, PCB, and backplate. Secure the assembly with the supplied mounting hardware.
4
Identify the inlet and outlet before connecting the G1/4 fittings. Seal unused ports with the supplied plugs.
5
If using the sync cable, match its orientation to a 5V 3-pin ARGB motherboard header. Keep the GPU unpowered while leak-testing the loop.

You also need G1/4 fittings matched to your tubing, a pump, a radiator, tubing, and coolant.

Barrow BS-GIG4080-PA contact-side diagram showing numbered thermal pad locations on the cold plate

Barrow’s installation diagram shows ① 1.2 mm, ② 0.5 mm, and ③ 1.0 mm.

FAQ

Does it fit the Gigabyte RTX 4080 16GB AERO OC?

Barrow lists the Gigabyte GeForce RTX 4080 16GB AERO OC. Verify the exact card model and PCB before ordering.

What fittings does the water block take?

Use G1/4 fittings matched to your tubing. The kit includes two G1/4 stop plugs. Order the tubing fittings separately.

Which motherboard header works with the sync cable?

Connect the sync cable to a 5V 3-pin ARGB header. Never connect it to a 12V 4-pin RGB header.

Is the backplate cooled by the loop?

The included aluminum backplate is passive. Coolant flows through the front water block.

Notes
  • 2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
  • 3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
  • 4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.

FormulaMod Official Store

Recent Reviews
+