Barrow
ASUS TUF RTX 4090 OG OC Water Block (A02 PCB) - Barrow BS-AST4090OG-PA with Black Backplate
Full-cover water block for the ASUS TUF RTX 4090 OG OC
The Barrow BS-AST4090OG-PA replaces the factory cooler on the ASUS TUF RTX 4090 OG OC with the A02 PCB. Its cold plate transfers heat from the GPU core, memory, and power delivery components to the coolant in a custom loop. A separate black aluminum backplate mounts behind the card.
Compatibility
Barrow confirms this card and PCB revision.
- ✓ASUS TUF Gaming GeForce RTX 4090 OG OC Edition (TUF-RTX4090-O24G-OG-GAMING) · A02 PCB
Before ordering, confirm the full ASUS model number and A02 revision. Compare your board layout with the PCB photo in the product gallery.
Design Highlights
Microchannels over the GPU core
Barrow machines the cold plate from 10 mm copper stock. Coolant flows through microchannels over the GPU core.
Black aluminum backplate
The included aluminum-alloy backplate covers the rear of the PCB. The block and backplate mount on opposite sides of the card.
Clear acrylic with addressable lighting
The clear top shows the coolant path and the Barrow LRC 2.0 lighting. Use a compatible 5V controller or a sync adapter for a 5V 3-pin ARGB motherboard header.
Key Specifications
| Model | BS-AST4090OG-PA |
|---|---|
| Cooling coverage | GPU core, memory, and power delivery |
| Cold plate | Copper |
| Top | Clear acrylic |
| Backplate | Black aluminum alloy |
| Water block (L × W × max. T) | 263.30 × 151.90 × 23.90 mm |
| Inlet and outlet thread | G1/4 |
| Lighting | Barrow LRC 2.0 · 5V 3-pin ARGB |
Which Version Do I Need?
Match the block to the exact model number and PCB revision of your graphics card.
TUF-RTX4090-O24G-GAMING
TUF-RTX4090-24G-GAMING
ROG-STRIX-RTX4090-O24G-GAMING
ROG-STRIX-RTX4090-24G-GAMING
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
A typical new loop uses a pump, reservoir, radiator, tubing, and coolant. Choose G1/4 fittings that match your tubing.
FAQ
Which Barrow block fits a standard TUF RTX 4090?
Barrow lists BS-AST4090-PA for TUF-RTX4090-O24G-GAMING and TUF-RTX4090-24G-GAMING.
Does it come with a backplate?
Yes. The block comes with a separate black aluminum-alloy backplate and mounting hardware.
How do I connect the ARGB lighting?
Select the lighting sync cable add-on for a 5V 3-pin ARGB motherboard header, or select the controller add-on for separate control. Never connect the lighting to a 12V 4-pin RGB header.
Do I need to buy tubing fittings separately?
Yes. Choose G1/4 fittings that match your tubing. The two included stop plugs seal the unused ports.
- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.













