• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Barrow

CPU Pump Block Combo for Intel or AMD | Barrow LTPRP-04I S / LTPRPA-04 S

stars, based on ( 1 ) reviews
€106.28 piece
items available
Contact Us
FormulaMod Official Store
Barrow · LTPRP-04I S / LTPRPA-04 S

Mini CPU pump block and reservoir

The Barrow Mini pairs a CPU water block with a PWM pump and reservoir in one unit for a custom cooling loop. Choose LTPRP-04I S for a supported Intel socket such as LGA1700 or LTPRPA-04 S for a supported AMD socket such as AM5. The pump circulates coolant through a separate radiator.

Fits
Intel LGA1700 or AMD AM5, by version
Ports
3 × G1/4
Pump
SATA power, PWM control

Compatibility

Match the model to your motherboard socket or platform.

  • ✓Intel LTPRP-04I S · LGA1700, LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156), plus X99 and X299 platforms
  • ✓AMD LTPRPA-04 S · AM5, AM4, AM3+, AM3, FM2

The Intel model comes with a black or silver cover. The AMD model comes with a black cover. Check your motherboard socket, mounting layout, and clearance for fittings and tubing before ordering.

Barrow LTPRPA-04 S AMD pump block dimensions showing the top view, elongated mounting bracket, and side profile

AMD model. Manufacturer dimensions in millimeters.

Design Highlights

Barrow LTPRPA-04 S black CPU pump block showing the finned metal pump cover and AMD mounting bracket

Three components in one assembly

The assembly sits over the CPU socket and combines the cold plate, pump, and reservoir. A finned metal cover sits over the pump and the block body is POM.

Barrow LTPRP-04I S and LTPRPA-04 S close-up of the machined cold plate microchannels

Nickel-plated copper cold plate

The 58 × 58 mm copper cold plate picks up heat from the CPU. Up to 49 microchannels give coolant more surface area to contact inside the block.

Barrow LTPRP-04I S silver Intel CPU pump block showing the three threaded ports on the side of the housing

Dedicated fill, inlet, and outlet ports

Port A is for filling. Connect the loop return to inlet B and route outlet C back into the loop. The adjacent ports are 22.20 mm apart on center. Check clearance around the pump cover when choosing fittings.

Key Specifications

Intel modelLTPRP-04I S
AMD modelLTPRPA-04 S
Block bodyPOM
Pump coverFinned metal
Cold plate58 × 58 mm nickel-plated high-purity copper
MicrochannelsUp to 49, with 0.4 mm slots and 0.2 mm spacing between slots
Ports3 × G1/4 (fill, inlet, outlet)
Adjacent port spacing22.20 mm center to center
Pump powerSATA power from the PSU
Pump speed controlSeparate 4-pin PWM connection
Intel dimensions93.60 × 91.50 × 64 mm
AMD dimensions85.10 × 105.30 × 64 mm
LightingNone
Barrow LTPRP-04I S Intel pump block dimensions showing the top view, mounting bracket, and side profile

Intel model. Manufacturer dimensions in millimeters.

Which Version Do I Need?

Barrow MiniTHIS PAGE
Choose the Mini for a POM body without lighting, then select the mounting version for your motherboard.
For a clear block body, select Intel and Acrylic on the linked product page.

What's in the Box

1 × CPU water block, pump, and reservoir assembly with platform-specific mounting bracket

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Power off the PC and remove the old CPU cooler. Clean the CPU heat spreader and apply your own thermal paste.
2
Align the block and mounting hardware for your socket. Tighten the spring screws evenly in a diagonal pattern.
3
Connect the loop to inlet B and outlet C with G1/4 fittings. Install the loop filter upstream of inlet B.
4
Attach a fill hose to port A and fill the reservoir until nearly full. Power only the pump during filling and leak testing. You can connect its SATA power lead to a separate PSU for this.
5
Run the pump and check for leaks. Switch it off before the reservoir empties, refill to nearly full, then restart it. Repeat until the coolant level stays steady while the pump runs.
6
After the leak test, switch off the PSU, seal the fill port, and connect the pump to the system’s SATA power. Connect the separate 4-pin PWM lead to a motherboard PWM header for speed control.

For the rest of the loop, you need a radiator and fans, tubing and matching G1/4 fittings, coolant, and an inline filter.

Barrow LTPRPA-04 S AMD mounting diagram showing the pump block and spring screws aligned over a motherboard socket

Barrow’s AMD mounting illustration.

FAQ

Which Barrow Mini CPU pump block fits AM5?

Choose the AMD LTPRPA-04 S. The Intel LTPRP-04I S is the version for Intel sockets such as LGA1700.

Do I need a separate pump, reservoir, or radiator?

The pump and reservoir are built into the CPU block. Add a separate radiator and fans to dissipate the heat from the coolant.

What powers the pump and what controls its speed?

The pump uses a SATA power connection from the power supply. The separate 4-pin PWM lead connects to the motherboard for speed control.

What fittings go on the three ports?

All three ports have G1/4 threads. Use fittings that match your tubing and follow the port markings for fill, inlet, and outlet.

Does the Mini have RGB lighting?

The POM Mini comes without lighting.

Notes
  • Product appearance structure will be upgraded without a prior notice, and the material object prevails.
  • Due to different display screens and other factors, display the product color is different, and the actual receipt shall prevail;
Recent Reviews ( 1 )
By
wrBEIRqX
Tuesday, 10 January 2023
555
+