• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Barrow

AMD AM4/AM5 CPU Water Block, Barrow LTCP03A-04N POM with 5V ARGB

FormulaMod Official Store
Barrow · LTCP03A-04N

Brief Series POM CPU Water Block

The Barrow LTCP03A-04N is a POM-top CPU water block for AMD Socket AM4 and AM5 desktops. Its nickel-plated copper cold plate transfers heat from the processor to the coolant in a custom loop. The block connects to the loop through G1/4 ports and has addressable lighting for a 5V motherboard header.

Fits
AMD AM4 / AM5
Cold plate
Nickel-plated copper
Ports
G1/4 inlet and outlet
Lighting
5V 3-pin ARGB

Compatibility

Check your motherboard’s CPU socket before ordering.

  • ✓AMD Socket AM4
  • ✓AMD Socket AM5

For motherboard lighting sync, use a 5V 3-pin ARGB header.

Barrow LTCP03A-04N brushed silver CPU water block with the black AMD mounting bracket

Brushed silver front panel.

Design Highlights

Barrow LTCP03A-04N brushed black CPU water block with labeled ports and spring mounting screws

Brushed black front panel.

POM top with two brushed finishes

Choose a brushed black or brushed silver front panel. Both finishes use the same POM top and black AMD mounting bracket.

Barrow LTCP03A-04N manufacturer illustration of parallel cold-plate microchannels

Barrow’s microchannel illustration.

Nickel-plated copper with jet microchannels

Coolant flows through up to 49 microchannels in the 58 × 58 mm copper cold plate. The nickel plating protects the cold plate surface.

Key Specifications

ModelLTCP03A-04N
TopPOM
Front panelBrushed black or brushed silver
Cold plateNickel-plated copper, 58 × 58 mm
Block size (L × W × T)105.30 × 69.60 × 21.60 mm
Port threads1 × G1/4 inlet and 1 × G1/4 outlet
Port spacing28.85 mm center to center
LightingLRC 2.0 ARGB. Use the sync adapter with a 5V 3-pin header.
Barrow LTCP03A-04N AMD mounting layout with top and side dimensions and port center spacing

Barrow’s AMD block drawing. Measurements are in millimeters.

Which Version Do I Need?

Compare the two Barrow blocks by top material and shape.

Barrow Brief LTCP03A-04NTHIS PAGE
Choose this block for a rectangular POM top with a brushed black or silver front panel.
Choose the Rays block for a round acrylic top. Select AMD on the linked page for AM4 or AM5.

What's in the Box

1 × CPU water blockSpring mounting screws

Both finish options are listed with a 5V motherboard sync adapter cable.

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Power off and unplug the PC. Remove the old cooler and clean residual compound from the CPU.
2
Apply your own thermal paste. Align the block with the motherboard mounting holes and secure it with the spring screws. Check your motherboard manual for its backplate setup.
3
Connect the loop with G1/4 fittings. Follow the IN and OUT markings on the block and place a loop filter upstream of the inlet.
4
For lighting, use the sync adapter to connect the block to a 5V 3-pin ARGB header. Check the connector orientation against your motherboard manual.
5
Leak-test the loop before powering on the PC.

You also need a pump, reservoir, radiator and fans, tubing, matching G1/4 fittings, and coolant. Barrow GLA-TLB53 is an example of a separate loop filter.

Barrow LTCP03A-04N AMD mounting illustration with spring screws, socket, and backplate

Barrow’s AMD mounting diagram. The backplate is shown as a mounting reference.

FAQ

Which AMD sockets does this CPU water block fit?

Barrow lists AMD AM4 and AM5. Confirm the socket in your motherboard specifications before ordering.

Can I connect the lighting to a 12V RGB header?

Use a 5V 3-pin ARGB header with the sync adapter. A 12V 4-pin RGB header is incompatible.

Can I swap the inlet and outlet?

Use the ports marked IN and OUT as indicated. Reversing the coolant flow can reduce cooling performance.

What changes between the black and silver options?

The front panel finish changes. Both options use the LTCP03A-04N POM block and the same AMD mounting bracket.

Notes
  • In case of upgrading to the appearance and structure, no further notice, the real object shall prevail

FormulaMod Official Store

Recent Reviews
+