Barrow
Intel & AMD CPU Water Block | Barrow Aurora LTYKB-AI / LTYKBA-ARK
Aurora Limited Edition CPU Water Block
The Barrow Aurora Limited Edition cools a desktop CPU in a custom liquid cooling loop. Choose LTYKB-AI for a supported Intel motherboard such as LGA 1700, or LTYKBA-ARK for a supported AMD motherboard such as AM4 or AM5. A nickel-plated copper cold plate transfers heat to the coolant, and the clear acrylic top shows the ARGB lighting.
Compatibility
Choose the block that matches your motherboard socket or platform.
- ✓Intel LGA 115x · LTYKB-AI
- ✓Intel LGA 1200 · LTYKB-AI
- ✓Intel LGA 1700 · LTYKB-AI
- ✓Intel X99 · LTYKB-AI
- ✓Intel X299 · LTYKB-AI
- ✓AMD AM5 · LTYKBA-ARK
- ✓AMD AM4 · LTYKBA-ARK
- ✓AMD AM3+ · LTYKBA-ARK
- ✓AMD AM3 · LTYKBA-ARK
- ✓AMD FM2 · LTYKBA-ARK
Check your motherboard's socket and cooler mounting layout before ordering.
Design Highlights
Microchannels in the copper cold plate
The cold plate uses 0.4 mm slots to increase the surface area in contact with the coolant. Put an inline filter upstream of the block to keep debris out of the channels.
Acrylic top with an addressable lighting ring
The clear top shows the ports and the light around the rim. Use the included manual controller to run the Barrow LRC 2.0 lighting.
Black or white mounting hardware
Both platform versions are available with a black bracket and black screws or a white bracket and silver screws.
Key Specifications
| Model | LTYKB-AI (Intel) LTYKBA-ARK (AMD) |
|---|---|
| Top | Clear acrylic |
| Cold plate | Nickel-plated copper, 58 × 58 mm |
| Microchannels | Up to 49 channels, 0.4 mm slot width, 0.2 mm spacing |
| Ports | 2 × G1/4, 28.85 mm center to center |
| Intel block (W × H × T) | 91.30 × 91.30 × 29.70 mm |
| AMD block (W × H × T) | 89.90 × 105.30 × 29.60 mm |
| Lighting | Barrow LRC 2.0, 5V 3-pin ARGB |
Which Version Do I Need?
Check the model number when comparing these round Barrow CPU water blocks.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
For a complete loop, you also need a pump, reservoir, radiator, G1/4 fittings, tubing, coolant, and an inline filter.
FAQ
Which version fits AM4 or AM5?
Select AMD to get the LTYKBA-ARK. Barrow lists both AM4 and AM5 for this model.
Can I sync the lighting with my motherboard?
Yes. Use a compatible adapter cable with a 5V 3-pin ARGB header. Keep the lighting off 12V 4-pin RGB headers.
Which fittings fit the water block?
Both ports take G1/4 fittings. Pick fittings that match the tubing in your loop.
Where does the inline filter go?
Place it in the coolant path before the block's inlet so it catches debris before it reaches the microchannels.
- In case of upgrading to the appearance and structure, no further notice, the real object shall prevail












