• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Astralcooler

RTX PRO 6000 Blackwell Water Block for Air-Cooled Server Edition and Max-Q | Astralcooler AC-GB-NVPRO6000

stars, based on ( 0 ) review
$230.52 piece
items available
Contact Us
FormulaMod Official Store
Astralcooler · AC-GB-NVPRO6000

Full-cover GPU water block for RTX PRO 6000 Blackwell

The Astralcooler AC-GB-NVPRO6000 is a full-cover GPU water block for custom liquid cooling. It fits the passively air-cooled NVIDIA RTX PRO 6000 Blackwell Server Edition (96GB) when the PCB layout and mounting holes match Astralcooler’s reference drawing. Its copper cold plate transfers heat from the GPU core, memory, and power components to the coolant.

Fits
Passive air-cooled Server Edition 96GB, Max-Q 96GB, RTX 6000D 84GB
PCB match required
Cold plate
Copper
Loop type
Custom liquid cooling

Compatibility

  • ✓NVIDIA RTX PRO 6000 Blackwell Server Edition (96GB, passive air cooling)
  • ✓NVIDIA RTX PRO 6000 Blackwell Max-Q Workstation Edition (96GB)
  • ✓NVIDIA RTX 6000D (84GB)

Compare your PCB layout and mounting holes with Astralcooler’s reference drawing before ordering.

Astralcooler AC-GB-NVPRO6000 reference PCB drawing with mounting holes, component layout, and power lead

Astralcooler PCB reference drawing

Design Highlights

Astralcooler AC-GB-NVPRO6000 underside showing the GPU contact area and raised surfaces around it

Cooling for the core, memory, and power components

The shaped copper base covers the GPU die and the surrounding memory and power components. The backplate mounts separately behind the board.

Astralcooler AC-GB-NVPRO6000 open coolant cavity showing the central fin array and flow paths

Jet-fed microchannels

Coolant passes through a fin array over the GPU area. Astralcooler specifies up to 176 microchannels in the cold plate.

Key Specifications

ModelAC-GB-NVPRO6000
Cooling typeFull-cover GPU block for a custom loop
Cold plate materialCopper
Copper plate length157 mm
Copper thermal conductivity401 W/m·K (material value published by Astralcooler)
Block profile97 mm high, 16.8 mm thick
Backplate dimensions188 × 96 × 4.2 mm
Front thermal pad thickness1.5 mm
Astralcooler AC-GB-NVPRO6000 dimension drawing of the separate block and backplate

Block above, backplate below. Measurements in millimeters.

Which Version Do I Need?

Check the edition on your card first. The 600 W Workstation Edition and the 300 W Max-Q Workstation Edition are distinct cards.

AC-GB-NVPRO6000THIS PAGE
Choose this water block for one of the listed cards if you’re fitting it to a custom loop.
For an all-in-one kit with a pump and radiator, compare the 360 mm one-block and 480 mm two-block options. Confirm PCB fit and radiator clearance for your build.
Choose this standalone block for the standard RTX PRO 6000 Blackwell Workstation Edition if you’re building a custom loop.
Choose the 360 mm AIO option for the standard RTX PRO 6000 Blackwell Workstation Edition if your case has room for the radiator.

What's in the Box

1 × GPU water block1 × backplate5 × 1.5 mm thermal padsM2 × 7 mm spring screwsM2 × 8 mm backplate screws

Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.

Installation & Use

1
Remove the stock cooler and clean the GPU die and the surfaces that contact the thermal pads.
2
Place the 1.5 mm pads as shown in the installation drawing and apply your own GPU thermal paste to the die.
3
Secure the block with the M2 × 7 mm spring screws, then mount the backplate with the M2 × 8 mm screws.
4
Connect the tubing, fill and bleed the loop, and leak-test it before powering the graphics card.

Also required · A pump, reservoir, radiator and fans, tubing, compatible fittings, and coolant. Match the fittings to the block’s ports and your tubing.

Astralcooler AC-GB-NVPRO6000 exploded installation drawing showing the block, thermal pads, PCB, backplate, and screws

1 Water block · 2 Thermal pads · 3 GPU PCB · 4 Spring screws · 5 Backplate · 6 Backplate screws

FAQ

Does the air-cooled RTX PRO 6000 Blackwell Server Edition have a fan?

It has a passive heatsink and relies on airflow through the server. This block lets a custom liquid loop carry heat away when the board layout and mounting holes match the reference drawing.

Does this block fit both RTX PRO 6000 workstation versions?

Astralcooler’s fit list includes the Max-Q Workstation Edition. For the standard 600 W Workstation Edition, use the Workstation Edition cooler options above.

Do I need a separate pump and radiator?

Yes. This is a standalone water block. Use it with a custom loop that has a pump, reservoir, radiator, tubing, compatible fittings, and coolant.

What thermal pads does the block use?

The kit comes with five 1.5 mm thermal pads. Use Astralcooler’s installation drawing to place the pads on the front of the PCB.

Notes
  • Allow clearance for the fittings and tubing when planning the installation. The dimension drawing measures the block and backplate separately.

FormulaMod Official Store

Recent Reviews
+