Astralcooler
NVIDIA H200 NVL 141GB AIO Liquid Cooler, 360 mm | Astralcooler AC-GBAIO-NVH200
360 mm liquid cooling for the NVIDIA H200 NVL
The Astralcooler AC-GBAIO-NVH200 is a single-card, all-in-one liquid cooler for the NVIDIA H200 NVL 141 GB PCIe GPU. It replaces the stock passive heatsink with a full-cover copper block that draws heat from the GPU, memory, and power components. An inline pump moves coolant to a 360 mm radiator, where three fans remove the heat.
Compatibility
- ✓NVIDIA H200 NVL Tensor Core GPU, 141 GB HBM3e, PCIe, with the PCB layout shown in the mounting guide
H200 SXM shares the 141 GB capacity and uses a separate module form factor.
Before ordering, match your PCB layout to the diagram in the product gallery and check the screw positions against the mounting diagram below.
Design Highlights
A copper plate for the GPU and memory
The 157 mm copper plate spans the main heat-producing areas of the PCB. The block routes coolant through up to 176 grooved microchannels.
A separate radiator for the GPU
An inline pump with a ceramic shaft sleeve circulates coolant through braided EPDM tubing. The three radiator fans move air through the aluminum core.
Key Specifications
| Model | AC-GBAIO-NVH200 |
|---|---|
| Configuration | Single-GPU AIO with backplate |
| GPU block dimensions | 266 × 97 × 16.8 mm (L × H × T) |
| Cold plate | Copper, 157 mm long |
| Radiator | 360 mm class, aluminum |
| Radiator with fans | 399 mm long × 60 mm thick |
| Tubing | Braided EPDM |
| Fan speed | 3,000 RPM ±10% |
| Fan static pressure | 5.3 mm H₂O |
| Fan airflow | 99.5 CFM |
| Fan noise | 41 dB(A), manufacturer specification |
| Thermal pads | 1.5 mm |
Which Version Do I Need?
Choose an AIO for a dedicated GPU loop or a standalone block if you are building a custom loop.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
Installation & Use
You will also need your own GPU thermal paste, the tools for your card's stock cooler, and a chassis with clearance for the radiator and tubing.
FAQ
How is the H200 NVL cooled from the factory?
The stock full-height, dual-slot H200 NVL PCIe card uses a passive heatsink and relies on chassis airflow. The AIO replaces that heatsink and moves GPU heat to a fan-cooled radiator.
Do I need to buy a separate pump and radiator?
This AIO includes the inline pump, tubing, radiator, and fans.
What case clearance does the cooler need?
Start with a 360 mm radiator mount and check for 399 mm of length and 60 mm of thickness with the fans in place. Allow extra room for the hoses to turn toward the card.
Does 141 GB identify the right board?
Check the complete model name and the PCB. NVIDIA lists 141 GB for both the H200 NVL PCIe card and the H200 SXM module.
- The 480 mm callout shows the vertical distance from the bottom of the radiator fans to the bottom edge of the GPU block in the drawing.












