Bykski
Bykski CT-D5-180-X-V2 D5 PWM Pump + 180mm PMMA Reservoir Combo, 5m Max Lift, 1000L/h Flow, 1800-4800 RPM, G1/4
Bykski CT-D5-180-X-V2 D5 PWM Pump + 180mm PMMA Reservoir Combo, 5m Max Lift, 1000L/h Flow, 1800-4800 RPM, G1/4
TL;DR: The CT-D5-180-X-V2 packages a D5-class PWM pump with a 180mm PMMA reservoir on a single mounted body, eliminating the external tube run between pump and tank. The pump delivers 5 meters of maximum lift and 1000 L/h of free-flow rate, with PWM speed control over a 1800-4800 RPM range from a 12V DC...
Common Applications
The CT-D5-180-X-V2 packages a D5-class PWM pump with a 180mm PMMA reservoir on a single mounted body, eliminating the external tube run between pump and tank. The pump delivers 5 meters of maximum lift and 1000 L/h of free-flow rate, with PWM speed control over a 1800-4800 RPM range from a 12V DC 1.5A supply. The reservoir holds roughly 350 ml of coolant and exposes two inlet ports plus a single outlet, so one inlet can be left as a dedicated fill port while the other returns coolant from the loop. Wetted parts are POM plastic; the outer square shell is anodized aluminum armor that does not contact the coolant. All ports are G1/4 threaded, and the assembly can mount in any 120mm fan position using the optional B-BKT-105 bracket.
Frequently Asked Questions
Q: What are the pump's flow and head specifications?
A: 5 meters maximum lift and 1000 L/h free flow, regulated by PWM over a 1800-4800 RPM range.
Q: What power input does the pump need?
A: 12V DC at 1.5A through a 4-pin Molex (power) plus a 4-pin PWM signal cable from the motherboard or a dedicated PWM controller.
Q: What thread size do the ports use?
A: G1/4 standard thread. Two inlets and one outlet on the reservoir, plus the standard G1/4 inlet and outlet on the D5 housing.
Q: What materials contact the coolant?
A: POM (wetted pump body and reservoir) and PMMA acrylic (reservoir tube). The outer aluminum armor is decorative and does not contact the coolant.
Q: How is it mounted in a case?
A: Direct mount to any 120mm fan hole pattern using the B-BKT-105 bracket (sold separately) or to a radiator end tank face.
