Barrow TWT90S-V2 G1/4 90-Degree Dual Rotary Adapter, Nickel-Plated Brass, Male-to-Female Fitting

Barrow TWT90S-V2 G1/4 90-Degree Dual Rotary Adapter, Nickel-Plated Brass, Male-to-Female Fitting

TL;DR: The TWT90S-V2 is a G1/4 90-degree adapter machined from brass and finished in nickel plating. The spout rotates a full 360 degrees independently of the base thread, so the bend can be aimed in any direction after the fitting is torqued down. The male-to-female arrangement lets it stack between a...

Common Applications

The TWT90S-V2 is a G1/4 90-degree adapter machined from brass and finished in nickel plating. The spout rotates a full 360 degrees independently of the base thread, so the bend can be aimed in any direction after the fitting is torqued down. The male-to-female arrangement lets it stack between a port and a compression or hardline fitting, redirecting tubing around motherboard heatsinks or reservoir tops. Two color finishes are produced from the factory: black and silver. The design keeps the internal bore open to minimize flow restriction across the bend.

Frequently Asked Questions

Q: What thread standard does the TWT90S-V2 use?

A: Standard G1/4 inch on both the male base and the female spout, compatible with any G1/4 water cooling port or compression fitting.

Q: How much does the spout rotate?

A: The spout rotates a full 360 degrees independently from the base, so the 90-degree angle can be pointed in any direction after install.

Q: What material is the fitting made of?

A: Brass body with nickel plating. There is no aluminum content.

Q: Is this a single or dual rotary fitting?

A: Dual rotary: both halves of the joint rotate, unlike the TWT90-V2.5 which is single-rotary.

Q: What colors are available?

A: Black (TWT90S-V2) and Silver (TWT90S-V2-Silver) per the Barrow catalog.