• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Granzon

MSI RTX 4090 SUPRIM / GAMING X TRIO GPU Water Block | Granzon GBN-MS4090TRIO

stars, based on ( 0 ) review
$342.67 piece
items available
Contact Us
FormulaMod Official Store
Granzon · GBN-MS4090TRIO

Full-cover GPU water block for MSI RTX 4090 SUPRIM and GAMING X TRIO

The Granzon GBN-MS4090TRIO is a full-cover GPU water block for select MSI GeForce RTX 4090 cards, including the SUPRIM LIQUID X 24G. Its nickel-plated copper cold plate cools the GPU core, memory, and voltage regulators in a custom loop. Aluminum armor wraps around the card, and side-mounted G1/4 ports connect the block to your tubing.

Fits
Select MSI GeForce RTX 4090 cards
Cold plate
Nickel-plated copper
Ports
Side-mounted G1/4

Compatibility

Granzon lists these MSI card models.

  • ✓MSI GeForce RTX 4090 SUPRIM 24G
  • ✓MSI GeForce RTX 4090 SUPRIM X 24G
  • ✓MSI GeForce RTX 4090 SUPRIM LIQUID X 24G
  • ✓MSI GeForce RTX 4090 GAMING X TRIO 24G

Before ordering, verify your card’s full model name and PCB revision. Compare the board layout with the PCB photo in the product gallery.

Granzon GBN-MS4090TRIO compatibility reference showing the MSI GeForce RTX 4090 GAMING X TRIO 24G with its factory three-fan cooler

MSI’s GAMING X TRIO 24G pictured with its factory cooler.

Design Highlights

Granzon GBN-MS4090TRIO underside showing the nickel-plated copper contact surfaces and the separate backplate

Cold plate for the GPU, memory, and VRM

The cold plate cools the GPU die through thermal paste and the memory and VRM components through thermal pads. Above the GPU core, coolant flows through 0.3 mm jet microchannels.

Granzon GBN-MS4090TRIO exploded view showing the vented front armor and backplate around the water block

Vented aluminum armor

Aluminum plates wrap around the front and back of the card. The plates have cutouts and sit outside the coolant path.

Granzon GBN-MS4090TRIO side port detail with A on the right and B on the left

Side-mounted inlet and outlet

The G1/4 connections sit on the side of the block. Use the port marked A in the diagram for coolant entering the block and the port marked B for coolant leaving it.

Key Specifications

ModelGBN-MS4090TRIO
Cold plateNickel-plated copper
Armor and backplateAluminum alloy
Cooling coverageGPU core, memory, and VRM
Jet microchannels0.3 mm
Port threadG1/4
Overall dimensions (L × W × T)294.44 × 141.73 × 27.1 mm
I/O bracket12 mm thick aluminum alloy
Granzon GBN-MS4090TRIO manufacturer dimension drawing showing the face and I/O bracket end of the water block

Granzon’s overall dimensions in millimeters.

Which Version Do I Need?

Check the GPU generation and the full MSI model name before choosing a Granzon block.

Granzon GBN-MS4090TRIOTHIS PAGE
Choose this block if your MSI RTX 4090 matches a model and PCB in the compatibility section above.
Choose this version for the MSI RTX 4090 VENTUS 3X 24G OC after checking its PCB.
Check this version for an MSI RTX 4080 GAMING X TRIO, SUPRIM, or SUPRIM X.

What's in the Box

1 × full-cover GPU water block with front armor1 × aluminum backplate1 × mounting hardware set

Supply your own G1/4 plugs for any unused ports.

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Shut down and disconnect power. Remove the card, take off its factory cooler and backplate, and clean away the old thermal material.
2
Confirm the required thermal pad thickness before mounting. Place the pads at the memory and VRM locations shown in the installation diagram. Apply your own thermal paste to the GPU die.
3
Align the block, PCB, backplate, and I/O bracket as shown. Tighten the mounting screws gradually and evenly.
4
Connect the loop to the G1/4 inlet and outlet and seal the unused openings with stop plugs.
5
Fill the loop and power only the pump for the leak test. Check the block and fittings for leaks before powering the rest of the system.

You’ll also need a pump, radiator, G1/4 fittings, tubing, and coolant. The optional Bykski vertical GPU mount is sold separately.

Granzon GBN-MS4090TRIO installation diagram showing the block, thermal pad locations, graphics card PCB, I/O bracket, and backplate

Granzon’s installation diagram. Blue strips mark pad locations.

FAQ

Can I use this block on an MSI RTX 4090 SUPRIM LIQUID X 24G?

Yes. Granzon lists this card for the GBN-MS4090TRIO. The block replaces the factory liquid cooler and connects to your custom loop.

What fittings do I need and which port is the inlet?

Use G1/4 fittings sized for your tubing. In Granzon’s side-port diagram, A is the inlet and B is the outlet.

Does coolant flow through the included backplate?

The aluminum backplate sits outside the water path. Coolant flows through the block.

How much room does the block need?

The overall dimensions are 294.44 × 141.73 × 27.1 mm. Check those dimensions and leave room for your fittings and tubing at the side ports.

Notes
  • Bykski reserves the right to upgrade/adjust the product, in case of upgrading to the appearance and structure, no further notice, the real object shall prevail.

FormulaMod Official Store

Recent Reviews
+