Granzon
DDC Pump with Optional Reservoir for PC Water Cooling, Granzon GFMB
DDC pump with a built-in reservoir and digital display
The Granzon GFMB is a DDC-style pump for custom PC water cooling. It circulates coolant through G1/4 side ports and has a built-in 43 mL reservoir. A front display shows pump speed, and the threaded pump top accepts a matching cylinder reservoir when you need more coolant capacity.
Fits and Connections
Use the GFMB in a custom PC liquid cooling loop.
- ✓Bykski CT-F60-AL-V2 cylinder reservoir for a direct top mount
- ✓G1/4 fittings for the pump’s two side ports
- ✓12 V DC 4-pin Molex from the power supply, with a motherboard PWM header for automatic speed control
Design Highlights
Read pump speed on the front display
The 2-inch display shows real-time speed, voltage, and pump load. It estimates flow from the current pump speed, and the estimate depends on loop resistance.
Set speed in 100 RPM steps in manual mode, or choose automatic mode to follow the motherboard’s PWM signal.
43 mL inside the pump housing
The GFMB integrates a small reservoir into the pump module. Use the pump-only option when you want to keep the space above the pump clear.
Add coolant capacity with a cylinder reservoir
The CT-F60-AL-V2 threads onto the pump top. Choose the reservoir length that leaves room in your case for mounting and tubing.
Key Specifications
| Model | GFMB |
|---|---|
| Pump type | DDC-style |
| Pump core | CP-D3PB-X |
| Pump housing | POM |
| Pump front (W × H) | 68.5 × 84 mm, without add-on reservoir |
| Pump net weight | 575 g |
| Built-in reservoir | 43 mL |
| Add-on reservoir length | 60, 100, 150, or 200 mm |
| Add-on reservoir tube | Clear acrylic |
| Add-on reservoir cap diameter | 66 mm |
| Pump side port thread | G1/4 |
| Pump ports | 2 inlets, 1 outlet |
| Speed | 1,800–4,800 RPM |
| Max. flow | 700 L/h |
| Max. head | 6 m |
| Power | 12 V DC via 4-pin Molex (D-type) |
| Speed control | Manual adjustment or motherboard PWM in automatic mode |
| Front display | 2-inch digital display |
Which Version Do I Need?
What's in the Box
Installation & Use
A complete loop also needs a radiator, water block, tubing, matching G1/4 fittings, stop plugs, and coolant.
FAQ
Can I use the GFMB without the cylinder reservoir?
Yes. The pump-only option has a built-in 43 mL reservoir.
Does the display measure coolant flow?
The display estimates flow from the current pump speed. Loop resistance affects how close that estimate is to actual flow.
How do I power the pump and control its speed?
Use a 12 V DC 4-pin Molex connection for power. Use the motherboard PWM header for automatic speed control, or set the speed in 100 RPM steps in manual mode.
How large is the GFMB before adding a reservoir?
The pump’s front face is 68.5 mm wide and 84 mm high. The listed 60, 100, 150, and 200 mm lengths are for the cylinder reservoir itself.
- Not responsible for any hardware damage. Use at your own risk.
- 1. Pay attention to the voltage requirements of the display power supply, use Molex(D-type) 4Pin
Please do not connect to the wrong voltage, otherwise the screen will be destroyed. - 2. In case of upgrading to the appearance and structure, no further notice, the real object shall prevail













