FormulaMod Fm-XQ Cable Stripper Tool for 22-10 AWG, Wire Cutter and Insulation Stripper for PSU Extension and DIY Cables

FormulaMod Fm-XQ Cable Stripper Tool for 22-10 AWG, Wire Cutter and Insulation Stripper for PSU Extension and DIY Cables

TL;DR: The Fm-XQ is a dedicated cable-stripping tool sized for the 22 AWG through 10 AWG range that covers virtually every wire in a custom PC build - 18 AWG PSU extension cables, 22 AWG fan and RGB leads, and the heavier 14-10 AWG GPU and ATX feed wires used in some modular setups. The tool separates the...

Common Applications

The Fm-XQ is a dedicated cable-stripping tool sized for the 22 AWG through 10 AWG range that covers virtually every wire in a custom PC build - 18 AWG PSU extension cables, 22 AWG fan and RGB leads, and the heavier 14-10 AWG GPU and ATX feed wires used in some modular setups. The tool separates the insulation cleanly from the conductor without nicking strands, which is essential for crimped Dupont, Mini-Fit Jr or Molex terminals that must hold the wire under a calibrated crimp force. Paired with a ratcheting crimper such as the SN-28B, it covers the full cut/strip/crimp cycle for sleeved PSU extensions.

Frequently Asked Questions

Q: Which wire sizes does the Fm-XQ handle?

A: 22 AWG through 10 AWG, covering fan/RGB leads (22 AWG), PSU extensions (18 AWG) and heavier ATX/GPU feed wires (14-10 AWG).

Q: Can I use it on sleeved cables?

A: Yes. The tool strips insulation cleanly, which is the usual final step after pulling fresh sleeving over a cable in custom PSU extension work.

Q: Does it crimp connectors as well?

A: No. Strip only. For crimping Dupont, Mini-Fit Jr or PSU pins, pair it with an SN-28B style ratcheting crimper like the FormulaMod Fm-DZQ.

Q: Will it work on solid-core wire?

A: It is intended for stranded wire used in PC cables. Solid-core copper may nick under the blade geometry.

Q: Does it cut the wire as well as strip it?

A: Yes. The tool includes cutting jaws to trim wire ends to length before stripping.