Bykski
Gigabyte RTX 4070 Ti / RTX 4070 Full-Cover Water Block with Backplate | Bykski N-GV4070TIAROC-X
Full-cover GPU water block for select Gigabyte RTX 4070 cards
The Bykski N-GV4070TIAROC-X is a full-cover GPU water block for select Gigabyte cards, including the GeForce RTX 4070 Ti GAMING OC 12G. It replaces the stock cooler and uses a copper cold plate to transfer heat from the GPU core, memory, and voltage regulators into a custom liquid cooling loop.
Compatibility
Bykski lists these Gigabyte models for the PCB layouts shown in its fitment chart.
- ✓GeForce RTX 4070 Ti AERO OC 12G
GV-N407TAERO OC-12GD - ✓GeForce RTX 4070 Ti GAMING OC 12G
GV-N407TGAMING OC-12GD - ✓GeForce RTX 4070 Ti WINDFORCE OC 12G
GV-N407TWF3OC-12GD - ✓GeForce RTX 4070 GAMING OC 12G
GV-N4070GAMING OC-12GD - ✓GeForce RTX 4070 WINDFORCE OC 12G
GV-N4070WF3OC-12GD - ✓GeForce RTX 4070 EAGLE OC 12G
GV-N4070EAGLE OC-12GD - ✓AORUS GeForce RTX 4070 SUPER MASTER 12G
GV-N407SAORUS M-12GD
Before ordering, verify your card’s full model number and PCB revision. Ask FormulaMod to confirm the board layout if you’re unsure.
Design Highlights
One cold plate for the core, memory, and VRM
The machined contact surfaces align with the GPU core, memory modules, and voltage regulators on the supported PCB layouts.
Jet microchannels over the GPU
Coolant passes through the fin array in the center of the cold plate. The clear acrylic top shows the channel layout.
Passive aluminum backplate
The included black backplate mounts behind the PCB, outside the coolant path.
Key Specifications
| Model (SKU) | N-GV4070TIAROC-X |
|---|---|
| Cold plate | Copper |
| Top | Clear acrylic (PMMA) |
| Backplate | Black aluminum, passive |
| Port thread | G1/4 inlet and outlet |
| Lighting | 5V 3-pin addressable RGB (ARGB / RBW) |
| Block length | 175.49 mm |
| Block thickness | 26.25 mm |
| Backplate (L × W × T) | 175.49 × 117.90 × 6.00 mm |
Which Version Do I Need?
Match the block to the card manufacturer and the full model name on your card label.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
For a new loop, you’ll also need a pump, reservoir, radiator, tubing, G1/4 fittings sized for your tubing, and coolant.
FAQ
Does this fit the Gigabyte RTX 4070 Ti WINDFORCE OC 12G?
Bykski lists the WINDFORCE OC 12G, model GV-N407TWF3OC-12GD. Confirm the PCB revision against the supported layout before ordering.
Which RTX 4070 SUPER does Bykski list for this block?
The Gigabyte AORUS GeForce RTX 4070 SUPER MASTER 12G, model GV-N407SAORUS M-12GD, is listed. Check that the PCB matches before ordering.
What RGB header does the block use?
Use a 5V 3-pin addressable RGB header. A 12V 4-pin RGB header can damage the lighting.
What fittings do I need?
Use G1/4 fittings that match your tubing. Use the supplied stop plugs to close the unused ports.
- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.














