• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

EVGA RTX 3090 / 3080 Ti FTW3 Ultra Gaming Water Block with Active Backplate | Bykski N-EV3090FTW3-TC-V2

stars, based on ( 1 ) reviews
$207.30 piece
items available
Contact Us
FormulaMod Official Store
Bykski · N-EV3090FTW3-TC-V2

EVGA FTW3 Ultra Gaming water block with active backplate

The Bykski N-EV3090FTW3-TC-V2 replaces the stock cooler on supported EVGA GeForce RTX 3090 FTW3 Ultra Gaming cards. The full-cover front block cools the GPU, memory, and voltage regulators. A coolant-fed backplate cools the RTX 3090’s rear memory, and the included bridge links both plates to the same custom loop.

Fits
Select EVGA FTW3 Ultra Gaming PCBs
Backplate
Liquid-cooled
Loop ports
G1/4
Lighting
5V 3-pin ARGB

Compatibility

Confirmed EVGA FTW3 Ultra Gaming PCB layouts

  • ✓EVGA GeForce RTX 3090 FTW3 Ultra Gaming 24GB (24G-P5-3987-KR)
  • ✓EVGA GeForce RTX 3080 Ti FTW3 Ultra Gaming 12GB

Not compatible:

  • ✗EVGA GeForce RTX 3090 Ti FTW3 Ultra Gaming

Bykski also lists the EVGA GeForce RTX 3080 FTW3 Ultra Gaming by name. Ask support to confirm your exact 3080 part number and PCB.

Before ordering, check your exact card part number and compare its full PCB layout and revision with Bykski’s compatibility information.

Bykski N-EV3090FTW3-TC-V2 compatibility reference showing the GPU, memory, and power connectors on an EVGA FTW3 bare PCB

Bare PCB from EVGA’s RTX 3090 and RTX 3080 FTW3 cooler guide. Check the layout for your exact card.

Design Highlights

Bykski N-EV3090FTW3-TC-V2 close-up of the front cold plate’s jet microchannel fins

Full-cover front block

Jet microchannels carry coolant across the GPU contact area. The same cold plate draws heat from the front memory and voltage regulators through thermal pads.

Bykski N-EV3090FTW3-TC-V2 cutaway with the active backplate’s coolant chamber highlighted in blue

Bykski’s illustration of the rear coolant chamber.

Coolant flow behind the PCB

The active backplate has its own coolant channel to draw heat from the RTX 3090’s rear memory. The bridge links the backplate to the front block so both run in the same loop.

Key Specifications

Manufacturer modelN-EV3090FTW3-TC-V2
Front cold plate and active backplateElectroplated copper with clear acrylic covers
Front block with bridge (L × H × D)288.79 × 154.62 × 47.05 mm
Active backplate (L × H × D)288.87 × 124.61 × 17.15 mm
Inlet and outlet threadG1/4
Lighting connector5V 3-pin addressable RGB (RBW)
Bykski N-EV3090FTW3-TC-V2 dimension drawing showing the front block with bridge above the separate active backplate

Bykski drawing. Front block with bridge above, active backplate below. Dimensions are in millimeters.

Which Version Do I Need?

N-EV3090FTW3-TC-V2THIS PAGE
Choose this kit for a supported FTW3 Ultra Gaming PCB when you want coolant flowing through the front block and rear plate.
Choose this version for front-side liquid cooling with a passive backplate. Check its own PCB compatibility list.
Check this separate block if your card is an EVGA GeForce RTX 3090 Ti FTW3 Ultra Gaming.

What's in the Box

1 × Full-cover GPU water block1 × Active backplate1 × Coolant bridgeMounting hardwareThermal padsSealing rings2× G1/4 stop plugs5V ARGB lighting

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Bykski N-EV3090FTW3-TC-V2 kit with the active backplate above the front water block and a separate clear bridge

Front block, active backplate, and coolant bridge.

Installation & Use

1
Shut down the PC and remove the graphics card. Remove the stock cooler, clean off the old thermal materials, and check that the block’s mounting holes line up with the PCB.
2
Place thermal pads on the designated memory and voltage regulator contact points. Follow the pad layout for your PCB, including rear memory where present. Apply your own thermal paste to the GPU die.
3
Align the front block, PCB, and backplate. Place the insulating washers at the GPU mounting holes as shown in Bykski’s installation guide. Tighten the GPU spring screws evenly in a diagonal pattern, then secure the remaining backplate screws.
4
Seat the sealing rings and secure the bridge to both plates without overtightening. Connect G1/4 fittings at the marked inlet and outlet and seal unused ports with stop plugs.
5
Connect the lighting to a compatible 5V 3-pin ARGB header. Leak-test the loop before powering the graphics card.

You also need a pump, radiator, G1/4 loop fittings, tubing, and coolant.

Bykski N-EV3090FTW3-TC-V2 exploded diagram showing the bridge, sealing rings, and screws aligned with the front and rear plates

Bridge installation. 1 marks the sealing rings, 2 the bridge, and 3 and 4 the fasteners.

FAQ

How do I check fit on an EVGA RTX 3080 FTW3 Ultra Gaming?

Bykski’s V2 chart lists this model by name. Have support confirm the exact EVGA part number and PCB layout before ordering.

Will this fit an EVGA RTX 3090 Ti FTW3 Ultra Gaming?

The RTX 3090 Ti FTW3 Ultra Gaming requires its own water block. Bykski lists the N-EV3090TIFTW3-X for that card.

Does coolant circulate through the backplate?

Yes. The included bridge routes coolant through the front block and the active backplate in the same loop.

What fittings and RGB header should I use?

Use G1/4 loop fittings and a 5V 3-pin ARGB header for the lighting. A 12V 4-pin RGB header can damage the LEDs.

Notes
  • This is a repair or replace only item. Returns not accepted on compatibility issues or if block has had water/fluid run through it.
  • Manufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item.
  • Product does NOT come with English instructions.
  • Not responsible for any damage caused by or when using this product. Please use at your own risk.
  • The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.
Recent Reviews ( 1 )
By
wrBEIRqX
Tuesday, 10 January 2023
555
+