• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

GUNNIR Intel Arc A770 16GB Water Block with Backplate – Bykski I-GNA770TF-SR

stars, based on ( 0 ) review
$235.08 piece
items available
Contact Us
FormulaMod Official Store
Bykski · I-GNA770TF-SR

GPU water block and backplate for GUNNIR Arc A770 16GB

The Bykski I-GNA770TF-SR is a GPU water block with a backplate for a matching GUNNIR Intel Arc A770 16GB board. It replaces the original cooler so the card can run in a custom liquid cooling loop. The block transfers heat to the coolant, and the loop’s radiator releases that heat to the air.

Fits
GUNNIR Arc A770 16GB (check PCB)
Cooling
Custom loop
Backplate
Included

Compatibility

Bykski names this card in its compatibility artwork.

  • ✓GUNNIR Intel Arc A770 16GB (exact PCB match required)

Confirm your exact card model and PCB layout before ordering.

Design Highlights

Bykski I-GNA770TF-SR underside showing the raised central contact surface and surrounding contact areas

Shaped contact surface

The underside has a raised center and surrounding contact surfaces. Check how these line up with the PCB before placing thermal pads.

Bykski I-GNA770TF-SR angled view of the screw-fastened cover and end terminal

Inlet and outlet at one end

The fittings connect at the end of the block. Leave room for the fittings and tubing, and follow the inlet and outlet marks on the block when you connect it.

Key Specifications

Bykski modelI-GNA770TF-SR
Cooling typeCustom-loop GPU water block
Water block (L × W × T)274.28 × 93.37 × 16.00 mm
Backplate (L × W × T)261.18 × 93.37 × 3.81 mm
Port locationAt the end of the block
Bykski I-GNA770TF-SR dimensional drawing with water block above and backplate below

Water block above, backplate below. The drawing gives each part’s dimensions in millimeters.

Which Version Do I Need?

Arc A770 cards come in several board versions. Use the manufacturer label to identify your card, then verify its PCB layout before picking a cooler.

Bykski I-GNA770TF-SR Water BlockTHIS PAGE
Choose this block and backplate if your GUNNIR Arc A770 16GB board matches and you have or plan to build a custom loop.

What's in the Box

GPU water blockBackplate

Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.

Installation & Use

1
Shut down the system, remove the graphics card, and take off its original cooler. Clean away any old thermal paste and pad residue.
2
Confirm the pad thicknesses and locations for your block. Apply the pads at the specified contact points and spread your own GPU thermal paste on the GPU die.
3
Align the block and backplate with the board’s mounting holes. Tighten the fasteners evenly and avoid overtightening.
4
Connect the fittings and tubing using the inlet and outlet marks on the block. Fill and bleed the loop.
5
Leak-test the loop with the graphics card unpowered before starting the system.

You also need a pump, reservoir, radiator with fans, compatible fittings, tubing, and coolant.

FAQ

Do I need a separate pump for this GPU water block?

Yes. You’ll need a pump and the rest of your custom loop to circulate coolant through the block.

How do I check whether my Arc A770 fits?

Start with the full model on the card label and confirm it’s a GUNNIR Arc A770 16GB. Verify the PCB layout for the block before ordering.

How much room do I need in my case?

Use the block and backplate dimensions to check clearance. Allow extra room for the fittings and tubing, and make sure the case has a mount for your radiator.

Notes
  • Keep the original cooler and its screws together in case you need to reinstall it.

FormulaMod Official Store

Recent Reviews
+