FormulaMod Official Store
ZOTAC RTX 3090 / 3080 Water Block with Backplate, Bykski N-ST3090XG-X-V2
Full-cover water block for select ZOTAC GeForce RTX cards
The Bykski N-ST3090XG-X-V2 replaces the stock cooler on select ZOTAC cards, including the GeForce RTX 3090 Trinity OC and RTX 3080 Trinity OC with a matching dual 8-pin short PCB. Its nickel-plated copper cold plate transfers heat from the GPU, memory, and voltage regulators to a custom liquid cooling loop. A passive aluminum backplate mounts behind the card.
Compatibility
Fits the following ZOTAC GeForce cards with the matching short PCB and two 8-pin PCIe power sockets.
- ✓ZOTAC GeForce RTX 3090-24G6X X-GAMING OC
- ✓ZOTAC GeForce RTX 3090 Trinity (ZT-A30900D-10P)
- ✓ZOTAC GeForce RTX 3090 Trinity OC (ZT-A30900J-10P)
- ✓ZOTAC GeForce RTX 3080 Ti-12G6X X-GAMING OC
- ✓ZOTAC GeForce RTX 3080 Ti AMP Holo (ZT-A30810F-10P)
- ✓ZOTAC GeForce RTX 3080 Ti Trinity OC (ZT-A30810J-10P)
- ✓ZOTAC GeForce RTX 3080-10G6X X-GAMING OC
- ✓ZOTAC GeForce RTX 3080 Trinity 10GB (ZT-A30800D-10P)
- ✓ZOTAC GeForce RTX 3080 Trinity OC 10GB (ZT-A30800J-10P)
- ✓ZOTAC GeForce RTX 3080 AMP Holo 10GB (ZT-A30800F-10P)
- ✓ZOTAC GeForce RTX 3070 Ti-8G6X X-GAMING GOC
Not compatible:
- ✗ZOTAC GeForce RTX 3090 AMP Extreme Holo (ZT-A30900B-10P, three 8-pin sockets)
- ✗ZOTAC GeForce RTX 3090 AMP Core Holo (ZT-A30900C-10P, three 8-pin sockets)
- ✗ZOTAC GeForce RTX 3090 Ti AMP Extreme Holo (ZT-A30910B-10P, 12+4-pin socket)
Bykski’s compatibility chart also uses the label “RTX 3080 Ti AMP HoloBlack.” If your card is described that way, verify the exact model code and board layout.
Before ordering, confirm the exact model on your card label and compare the entire PCB with the diagram. Check the mounting holes, board outline, and power socket positions.
Design Highlights
Microchannels in the copper cold plate
The copper plate contacts the GPU core, memory, and power delivery components. Jet microchannels route coolant through the plate over the GPU.
Front block and passive backplate
The cold plate and backplate mount on opposite sides of the PCB. Coolant runs through the front block, and the aluminum backplate contacts the marked rear components through thermal pads.
Key Specifications
| Model | N-ST3090XG-X-V2 |
|---|---|
| Cold plate | Nickel-plated T2 copper |
| Top | Clear acrylic |
| Backplate | Black aluminum, passive |
| Cooling coverage | GPU core, memory, and voltage regulators |
| Inlet / outlet thread | G1/4 |
| Lighting | 5V 3-pin addressable RGB (RBW) |
Which Version Do I Need?
Choose by how you want to cool the back of the PCB, then verify your card against the listing for that block.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
You also need a pump, radiator, tubing, coolant, and G1/4 fittings.
FAQ
Will it fit my ZOTAC RTX 3080 Trinity?
The 10GB Trinity (ZT-A30800D-10P) and Trinity OC (ZT-A30800J-10P) are listed for the matching short PCB with two 8-pin power sockets. Verify the model code and compare the board before ordering.
Will it fit the ZOTAC RTX 3090 Ti AMP Extreme Holo?
The ZT-A30910B-10P has a 12+4-pin socket. The block requires the listed short PCB with two 8-pin sockets.
What else do I need for RTX 3090 water cooling?
This block connects to a custom loop with a pump, radiator, tubing, coolant, and G1/4 fittings.
Which header does the lighting use?
Use a compatible 5V three-pin ARGB header with the lighting adapter cable. Keep the RBW lighting disconnected from 12V four-pin RGB.
Does coolant flow through the included backplate?
Coolant flows through the front block. The included backplate is passive aluminum.
- If you have any questions, don't hesitate to contact support for confirmation.











