Bykski
ASUS ROG Astral RTX 5090 Water Block with Backplate | Bykski N-AS5090ASTRAL-X
Full-cover GPU water block for the ROG Astral RTX 5090 OC
The Bykski N-AS5090ASTRAL-X replaces the stock cooler on the ASUS ROG Astral GeForce RTX 5090 32GB OC Edition to connect the card to a custom liquid cooling loop. Its nickel-plated copper cold plate cools the GPU core, memory, and power stages. An aluminum backplate mounts behind the card.
Compatibility
Match your ASUS card’s full model number.
- ✓ROG Astral GeForce RTX 5090 32GB OC Edition (ROG-ASTRAL-RTX5090-O32G-GAMING)
- ✓ROG Astral GeForce RTX 5090 D 32GB OC Edition (ROG-ASTRAL-RTX5090D-O32G-GAMING)
Before ordering, confirm your exact card’s PCB layout and mounting hole positions.
Design Highlights
Full-cover nickel-plated copper cold plate
The machined contact surfaces line up with the GPU core, memory, and power stages. Leave room at the end of the card for fittings and tubing.
Jet microchannels
Coolant passes through 0.3 mm jet microchannels over the GPU core before returning to the loop.
Clear acrylic window with addressable lighting
The black faceplate frames a clear acrylic window over the coolant path. Use a compatible 5V 3-pin ARGB header for motherboard sync.
Key Specifications
| Model | N-AS5090ASTRAL-X |
|---|---|
| Cooling coverage | GPU core, memory, and power stages |
| Cold plate | Electroless nickel-plated T2 copper |
| Cold plate length / thickness | 159.226 mm / 6 mm |
| Nickel plating thickness | 0.001–0.002 mm |
| Copper base under the channels | 0.35 mm in Bykski’s cross-section |
| Microchannels | 0.3 mm jet microchannels, up to 56 |
| Channel area | 10,962.06 mm² |
| Top | Clear PMMA acrylic with a black faceplate |
| Backplate | Black aluminum, outside the coolant path |
| Water block (L × W × T) | 283.021 × 136.25 × 30.10 mm |
| Backplate (L × W × T) | 283.02 × 136.25 × 22.89 mm |
| Port thread | G1/4 inlet and outlet at the end of the block |
| Lighting | 5V 3-pin ARGB (RBW) |
Which Version Do I Need?
Pick the block by the full model number on your graphics card.
What's in the Box
The controller option adds one light controller.
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
For the rest of the loop, you’ll need a pump, reservoir, radiator, coolant, tubing, and G1/4 fittings sized for your tubing.
FAQ
Does it fit my ASUS ROG Astral RTX 5090 32GB OC?
Yes, for the ROG-ASTRAL-RTX5090-O32G-GAMING layout shown above. Confirm your full model number and compare the PCB before ordering.
Does the RTX 5090 D OC fit?
The ROG-ASTRAL-RTX5090D-O32G-GAMING is listed for this block. Check your card’s PCB layout before ordering.
What fittings do I need?
Use G1/4 fittings that match your loop tubing. The inlet and outlet are at the end of the block.
Do I need a separate light controller?
You can sync the lighting with a compatible 5V 3-pin ARGB motherboard header. A 12V RGB header can damage the lighting. Choose the optional controller to run the lighting without motherboard sync.
Does the included backplate carry coolant?
Coolant flows through the front water block. The included black aluminum backplate mounts behind the PCB.
- This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
- This product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.














