Bykski
MSI RTX 4060 Ti Ventus 2X 16GB Water Block with Backplate — Bykski N-MS4060TIVES-X
Full-cover water block for the MSI RTX 4060 Ti Ventus 2X 16GB
The Bykski N-MS4060TIVES-X replaces the factory cooler on the MSI GeForce RTX 4060 Ti Ventus 2X 16GB with the PCB layout shown below. The T2 copper cold plate transfers heat from the GPU core, memory, and voltage regulators to a custom liquid cooling loop. The block comes with a black aluminum backplate.
Compatibility
Bykski lists this card and PCB layout.
- ✓MSI GeForce RTX 4060 Ti Ventus 2X 16GB
The board Bykski uses to illustrate compatibility is marked MS-V517 VER:1.0. Before ordering, confirm the full model name and compare your PCB’s component layout and mounting holes with Bykski’s diagram.
Design Highlights
T2 copper cold plate
The T2 copper cold plate has jet microchannels over the GPU core. The full-cover design also draws heat from the memory and voltage regulators through thermal pads.
G1/4 ports on both sides of the terminal
Use the top or bottom port positions to route the tubing in your case. Follow the inlet and outlet markings on the block and cap the unused ports.
5V addressable lighting
The RBW strip lights the clear acrylic top. The included sync cable connects it to a 5V 3-pin ARGB motherboard header.
Key Specifications
| Model | N-MS4060TIVES-X |
|---|---|
| Cold plate | T2 copper |
| Top | Clear acrylic |
| Backplate | Black aluminum |
| Cooling coverage | GPU core, memory, and voltage regulators |
| Port thread | G1/4 |
| Block (L × W × T) | 164.64 × 150.69 × 26.75 mm |
| Backplate (L × W × T) | 164.64 × 121.18 × 6.00 mm |
| Lighting | 5V 3-pin ARGB (RBW) |
Which Version Do I Need?
Check whether your MSI Ventus 2X is an RTX 4060 Ti or RTX 4060, then verify your card’s exact PCB layout.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
You also need a pump, radiator, G1/4 loop fittings, tubing, and coolant.
FAQ
Which MSI RTX 4060 Ti does this water block fit?
Bykski lists the Ventus 2X 16GB with the PCB layout shown above. Compare the full board layout and hole positions before ordering.
Does the water block come with a backplate?
Yes. The supplied black aluminum backplate mounts behind the PCB, outside the coolant path.
Which RGB header should I use?
Use a 5V 3-pin ARGB header with the supplied sync cable. A 12V 4-pin RGB header can damage the lighting.
What size fittings do I need?
Use G1/4 fittings for the inlet and outlet. Use the included stop plugs to seal the unused ports.
- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.
- The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.













