Bykski
RTX 4070 SUPER Water Block for ASUS Dual EVO 12GB, Bykski N-AS4070SDUALEVO-X
Full-cover water block for the ASUS Dual RTX 4070 SUPER EVO
The Bykski N-AS4070SDUALEVO-X is a full-cover GPU water block for the ASUS Dual GeForce RTX 4070 SUPER EVO 12GB. It replaces the original cooler and transfers heat from the GPU core, memory, and power stages to a custom liquid cooling loop. It includes a passive aluminum backplate and connects to the loop through G1/4 ports.
Compatibility
Match the exact card model and board layout.
- ✓ASUS Dual GeForce RTX 4070 SUPER EVO 12GB (DUAL-RTX4070S-12G-EVO)
Not compatible:
- ✗Other PCB layouts
Before ordering, compare your card’s PCB layout and mounting holes with the board diagram in Installation & Use.
Design Highlights
One cold plate for the GPU, memory, and VRM
A T2 copper cold plate makes contact with the GPU core, memory, and voltage regulation components through their thermal interfaces. Coolant passes through 0.30 mm jet microchannels, visible through the clear acrylic top.
Passive aluminum backplate
The passive black aluminum backplate mounts behind the PCB. Coolant stays in the front block.
5V addressable RGB lighting
For motherboard control, connect the RBW lighting to a 5V 3-pin ARGB header through a compatible adapter. You can also use a compatible 5V RBW controller. Do not connect the lighting to a 12V 4-pin RGB header.
Key Specifications
| Model | N-AS4070SDUALEVO-X |
|---|---|
| Cold plate | T2 copper cold plate |
| Top | Clear PMMA acrylic |
| Backplate | Passive black aluminum |
| Cooling coverage | GPU core, memory, and VRM |
| Cold plate length | 145.46 mm |
| Copper plate thickness | 9 mm |
| Local copper base thickness | 0.35 mm (Bykski cross-section schematic) |
| Jet microchannels | 0.30 mm, up to 44 channels |
| Port thread | G1/4 inlet and outlet |
| Water block (L × W × T) | 189.87 × 146.01 × 26.25 mm |
| Backplate (L × W × T) | 189.87 × 116.01 × 6.00 mm |
| Lighting | 5V ARGB (RBW). Motherboard connection via adapter to a 5V 3-pin ARGB header. |
Which Version Do I Need?
Use the full ASUS model name to find the block for your PCB.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
You also need a pump, radiator, G1/4 tubing fittings, tubing, coolant, and your own thermal paste.
FAQ
Will this fit my RTX 4070 SUPER?
Check that the card is the ASUS Dual GeForce RTX 4070 SUPER EVO 12GB (DUAL-RTX4070S-12G-EVO). Match the PCB and mounting holes before ordering.
Can I use it as an all-in-one (AIO) GPU cooler?
This block goes into a custom liquid cooling loop. It requires a separate pump, radiator, fittings, tubing, and coolant.
What fittings do I need?
Use G1/4 fittings for the inlet and outlet. Use the included stop plugs to close the unused ports.
How do I connect the RBW lighting?
Use a compatible adapter to connect it to a 5V 3-pin ARGB motherboard header, or use a compatible 5V RBW controller. A 12V 4-pin RGB header can damage the lighting.
Where do the thermal pads go?
Place the supplied thermal pads on the memory and VRM contact areas shown in the installation diagram. Apply your own thermal paste to the GPU die.
- This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
- This product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.














