Bykski
NVIDIA Tesla T4 Water Block with Backplate – Bykski N-TESLA-T4-X
Full-cover water block for the NVIDIA Tesla T4
The Bykski N-TESLA-T4-X is a full-cover water block and backplate for the NVIDIA Tesla T4 16 GB PCIe accelerator. It replaces the stock passive heatsink, which depends on airflow from the chassis. The block cools the GPU, memory, and power components by transferring their heat to the coolant in a custom loop.
Compatibility
- ✓NVIDIA Tesla T4 16 GB GDDR6 PCIe
Not compatible:
- ✗NVIDIA Tesla P4
Before ordering, send us a clear photo of your card’s bare PCB so we can check fit.
Design Highlights
Nickel-plated copper cold plate
The T2 copper cold plate draws heat from the GPU core, memory, and power MOSFETs. Coolant flows through 0.3 mm jet microchannels in the cold plate.
Separate aluminum backplate
The included black aluminum backplate mounts behind the card. Coolant flows through the water block on the front of the PCB.
Key Specifications
| Model | N-TESLA-T4-X |
|---|---|
| Cold plate | Nickel-plated T2 copper |
| Other block material | POM |
| Backplate | Black aluminum |
| Port layout | Inlet and outlet on the same end |
| Water block (L × W × T) | 201.41 × 100.92 × 16.50 mm |
| Backplate (L × W × T) | 167.55 × 61.38 × 2.00 mm |
Which Version Do I Need?
Start with your card's PCB layout and decide whether you want to build a custom loop or use an all-in-one cooler.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
Installation & Use
You also need a pump, reservoir, radiator with fans, tubing, matching fittings, and coolant.
FAQ
How is the Tesla T4 cooled from the factory?
The stock Tesla T4 uses a passive heatsink that depends on chassis airflow. This block transfers heat into a custom liquid-cooling loop.
Will the water block fit my case?
Use the dimension drawing to check space for the block, fittings, and tubing. If you're building a new loop, also check the radiator mounting space.
Do I need a separate pump and radiator?
Yes. Connect the block to a custom loop with a pump, reservoir, radiator and fans, fittings, tubing, and coolant.
What thickness of thermal pads should I use?
Bykski specifies 1.5 mm pads at the memory and power MOSFET contact points shown in its installation diagram.
- The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.












