• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

AMD Radeon Instinct MI50 Water Block with Backplate | Bykski A-MI50-X

stars, based on ( 0 ) review
$194.13 piece
items available
Contact Us
FormulaMod Official Store
Bykski · A-MI50-X

Full-cover liquid cooling for the AMD Radeon Instinct MI50

The Bykski A-MI50-X is a full-cover water block for the AMD Radeon Instinct MI50 PCB layout shown in Bykski’s reference photo. It replaces the card’s stock heatsink and uses a T2 copper cold plate to cool the GPU core, memory, and voltage regulators. Its side-mounted G1/4 ports connect the block to your custom liquid cooling loop.

Fits
AMD Radeon Instinct MI50
Cold plate
T2 copper
Ports
G1/4
Backplate
Aluminum

Compatibility

Bykski lists the following card for this block.

  • ✓AMD Radeon Instinct MI50 (pictured PCB layout)

Before ordering, compare your entire PCB with Bykski’s reference photo, including the mounting holes, power connectors, and component positions.

Bykski A-MI50-X compatibility photo showing the full bare AMD Radeon Instinct MI50 PCB, its mounting holes, and two power connectors at the right edge

Bykski’s reference photo of the AMD Radeon Instinct MI50 PCB.

Design Highlights

Bykski A-MI50-X underside with the machined copper cold plate, raised contact areas, and mounting posts

One cold plate for the core, memory, and VRM

The contoured T2 copper plate draws heat from the GPU, memory, and power delivery components. The included aluminum backplate mounts behind the PCB, outside the coolant path.

Bykski A-MI50-X manufacturer illustration showing coolant routing through the block and across the central microchannel area

Manufacturer illustration of the coolant path.

Jet microchannels

The channels guide coolant across the area of the cold plate above the GPU core.

Bykski A-MI50-X angled top view showing the black POM terminal with both side-facing ports

Side-facing inlet and outlet

The black POM terminal puts the inlet and outlet side by side. Use G1/4 fittings sized for your tubing.

Key Specifications

Model (SKU)A-MI50-X
Block typeFull-cover GPU water block
Cold plateT2 copper
Top panelStainless steel
Port terminalBlack POM
BackplateBlack aluminum
Finish colorBlack / gunmetal
Port threadG1/4 inlet and outlet
Water block (L × W × T)266.46 × 117.01 × 26.07 mm
Backplate (L × W × T)266.71 × 106.59 × 6.00 mm
LightingNone

Which Version Do I Need?

Choose a water block for a custom loop or an all-in-one cooler for your MI50.

Bykski A-MI50-XTHIS PAGE
Choose this block if you already have a custom loop or want to select your own pump, radiator, and tubing.
Choose the all-in-one cooler if you want a block and radiator connected by tubing as a single assembly.

What's in the Box

1 × full-cover GPU water block1 × aluminum backplateThermal padsMounting hardware

G1/4 stop plugs are not included. If you need to seal an unused port, supply your own plug.

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Power off the system, remove the card, and take off its stock heatsink. Clean off the old thermal material.
2
Cut the supplied thermal pads to fit the locations shown in the diagram. Keep the inductors clear and apply your own thermal paste to the GPU die.
3
Align the block, PCB, and backplate. Place the insulating washers at the four mounting holes around the GPU. Tighten the GPU mounting screws gradually in a cross pattern, then fit the backplate screws.
4
Connect the loop to the ports marked IN and OUT using G1/4 fittings. Fill and bleed the loop. Power only the pump during the leak test.

For a new loop, supply a pump, reservoir, radiator, coolant, and tubing with matching G1/4 fittings.

Bykski A-MI50-X installation drawing showing the pad locations beside the GPU package and a syringe pointing to the GPU die

Manufacturer installation drawing. The dark strips and squares mark the pad locations. The syringe points to the GPU die.

FAQ

How do I check whether this water block fits my MI50?

Confirm the card is an AMD Radeon Instinct MI50, then match its full PCB layout to Bykski’s reference photo before ordering.

Can I use this block with my existing cooling loop?

Yes. Connect it to the loop with G1/4 fittings sized for your tubing. A new loop also needs a pump, reservoir, radiator, tubing, and coolant.

Does it come with a backplate?

Yes. One black aluminum backplate is included and mounts behind the card.

What size are the inlet and outlet threads?

Both ports use G1/4 threads. Follow the IN and OUT markings when connecting them.

Does the A-MI50-X have lighting?

The A-MI50-X configuration sold here has no lighting.

Notes
  • This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
  • The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
  • Not responsible for any damage caused by or when using this product. Please use it at your own risk.
  • The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.

FormulaMod Official Store

Recent Reviews
+