Bykski
NVIDIA Tesla P4 Cooler, Full-Cover Water Block with Backplate (Fits Tesla T4) | Bykski N-TESLA-P4-X-V2
Full-cover water block for matching NVIDIA Tesla P4 and T4 PCBs
The Bykski N-TESLA-P4-X-V2 replaces the stock cooler on NVIDIA Tesla P4 and Tesla T4 cards that match the PCB layouts listed below. Its full-cover cold plate transfers heat from the GPU core, memory and power MOSFETs to coolant circulating in a custom loop. The block comes with a separate aluminum backplate.
Compatibility
Fits the following cards when their PCB matches Bykski’s listed layout.
- ✓NVIDIA Tesla P4
- ✓NVIDIA Tesla T4
A different PCB layout will prevent the block from fitting. Before ordering, compare your board outline, component positions and mounting holes with the drawing.
Design Highlights
Nickel-plated copper cold plate
The cold plate uses high-purity T2 copper with a nickel finish. Bykski lists a thermal conductivity of 401 W/(m·K) for the copper.
Key Specifications
| Part number | N-TESLA-P4-X-V2 |
|---|---|
| Block type | Full-cover GPU water block with backplate |
| Block materials | Nickel-plated T2 copper cold plate, stainless steel panel and black POM terminal |
| Backplate | Black anodized aluminum, outside the coolant path |
| Port thread | G1/4 |
| Inlet and outlet | Either port can serve as the inlet, depending on tubing routing |
| Color | Black with gunmetal |
| Block dimensions | 168.53 × 85.61 × 19.20 mm |
| Backplate dimensions | 167.60 × 64.46 × 6.00 mm |
| Lighting | None |
Which Version Do I Need?
Choose a cooler that matches your card’s PCB and the type of liquid cooling you plan to use.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
Installation & Use
For a new custom loop, also plan for a pump, reservoir, radiator, G1/4 fittings for the block, tubing and coolant.
FAQ
Can I use this block on a custom PCB?
Compare your board with Bykski’s drawing. The block fits the listed Tesla P4 and T4 PCB layouts. A board with a different layout will not fit.
Do I need a pump and radiator?
Yes. This block connects to a custom liquid cooling loop with a pump, reservoir, radiator, fittings, tubing and coolant.
How is the stock NVIDIA Tesla P4 cooled?
The stock Tesla P4 is passively cooled and relies on airflow through the chassis. This full-cover water block replaces the stock cooler and connects to a custom liquid cooling loop.
- This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.











