Bykski
Enflame S60 GPU AIO Liquid Cooler, 360 mm | Bykski B-FRD-SYS60
360 mm AIO liquid cooler for the Enflame S60
The Bykski B-FRD-SYS60 is an all-in-one liquid cooler for the Enflame S60 PCIe inference accelerator. It replaces the stock air cooler with a full-cover water block connected by tubing to an inline pump and a 360 mm radiator. Coolant carries heat from the card to the radiator mounted in the chassis.
Compatibility
Bykski lists this PCB layout
- ✓Enflame S60 48 GB PCIe inference accelerator (S60 PCB layout)
Verify your exact card model and PCB layout before ordering.
Design Highlights
Three-fan layout shown for the 360 mm radiator
Bykski specifies an aluminum radiator with 12 coolant channels. Check the radiator’s full length and its depth with the fans you plan to use.
Pump mounted in the tubing
The inline pump sits between the radiator and the water block. Leave space for the pump when planning how to route the braided tubing.
Full-cover cold plate
The nickel-plated T2 copper cold plate cools the accelerator chip. Thermal pads transfer heat from the memory and power circuitry to the block. Coolant passes through 0.3 mm jet microchannels.
Key Specifications
| Single-card model | B-FRD-SYS60-360 |
|---|---|
| Cold plate | T2 copper with electroless nickel plating |
| Cold plate microchannels | 0.3 mm |
| Block size (L × W × T) | 279.07 × 106.66 × 16 mm |
| Radiator | 360 mm, aluminum, 12 coolant channels |
| Radiator length | 396 mm |
| Radiator depth with fans | 63 mm as illustrated |
| Radiator fan layout | Three fans shown |
| Inline pump (manufacturer specifications) | 7,000 RPM, 450 L/h, 7 m head |
| Tubing | Braided, attached to the block and radiator |
Which Version Do I Need?
Match the option to the number of S60 cards you plan to cool. The dimensions shown are for the single-card kit.
What’s in the Box (Single-Card Kit)
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
Installation & Use
Have GPU thermal paste and correctly sized thermal pads ready. Plan for a 360 mm radiator mount, compatible radiator fans and suitable power connections for the pump and fans.
FAQ
Is this a universal GPU AIO?
Bykski lists the Enflame S60 PCIe inference accelerator with the S60 PCB layout. Verify your board before ordering.
How is the S60 originally cooled?
The 300 W PCIe S60 uses a passive air heatsink that relies on chassis airflow.
Do I need a separate pump?
The single-card design uses an inline pump in the tubing between the radiator and the water block.
How much case clearance does the single-card kit need?
Check for a 360 mm radiator mount with room for the 396 mm radiator. Bykski’s illustrated fan layout is 63 mm deep. Check the depth with your chosen fans and leave room for the tubing and inline pump.
- Check radiator and tubing clearance in your case before removing the stock cooler.













