• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

RTX 5090 AIO Liquid Cooler for Palit GameRock 32GB, Bykski B-FRD-PT5090GK, 360 mm

stars, based on ( 0 ) review
items available
Contact Us
FormulaMod Official Store
Bykski · B-FRD-PT5090GK

RTX 5090 AIO liquid cooler for Palit GameRock 32GB

The Bykski B-FRD-PT5090GK is an all-in-one liquid cooler for the Palit GeForce RTX 5090 GameRock 32GB. It replaces the stock air cooler with a full-cover block for the GPU, memory, and power stages. An inline pump circulates coolant between the block and a case-mounted 360 mm radiator.

Fits
Palit RTX 5090 GameRock 32GB
Radiator
360 mm
Cold plate
Copper
Coverage
GPU, memory, and power stages

Compatibility

Compatible card

  • ✓Palit GeForce RTX 5090 GameRock 32GB (NE75090019R5-GB2020G)

Use the bare-board photo to compare the mounting holes and component layout. Verify the exact card model and PCB before ordering.

Bykski B-FRD-PT5090GK fit reference photo showing the bare Palit GeForce RTX 5090 GameRock PCB, GPU die, and PCIe edge connector

Palit GeForce RTX 5090 GameRock 32GB bare PCB.

Design Highlights

Bykski B-FRD-PT5090GK-360 render showing one GPU block, a three-fan radiator, braided tubing, and an inline pump

The pump sits in the tubing

Braided hoses connect the full-cover GPU block to the 360 mm radiator on the standard single-card kit. The inline pump sits between them.

Bykski B-FRD-PT5090GK close-up of the parallel microchannels in the cold plate

Copper cold plate with 0.3 mm microchannels

The copper cold plate draws heat from the GPU, memory, and power stages. Its jet microchannels increase the surface area in contact with coolant.

Bykski B-FRD-PT5090GK installation illustration with a top-mounted radiator and tubing routed along the front of the case

Radiator mounting in the case

The standard aluminum radiator has 12 coolant channels. Check the space at your 360 mm mounting position for the radiator, fans, and tubing bends.

Key Specifications

Model familyB-FRD-PT5090GK
Water block size233.66 × 121.62 × 17 mm (per Bykski drawing)
Cold plateCopper
Copper thermal conductivity401 W/(m·K), manufacturer material value
Block microchannels0.3 mm jet microchannels, up to 56 channels, approximately 15,565 mm² wetted area
Radiator (-360)360 mm class, aluminum
Radiator count and lengthOne 396 mm-long 360 mm radiator per kit
Radiator thickness with fans63 mm for both kits (38 mm radiator + 25 mm fans)
Included radiator fans3 × 120 mm fans per kit, 25 mm thick each
Tubing (-360)Braided
Bykski B-FRD-PT5090GK water block dimension diagram showing a face view and a side view

Water block dimensions in millimeters (Bykski drawing).

Which Version Do I Need?

Choose either 360 mm option from the Size menu. Both kits are 63 mm thick with fans installed. Match your exact card and PCB first. Palit lists the GameRock and GameRock OC as separate models.

B-FRD-PT5090GK-360 (single card)
Includes one GPU block and one matching backplate.
B-FRD-PT5090GK-360-H (dual card)
Two GPU blocks share one 360 mm radiator. The kit includes a matching backplate for each block. Check the space for the radiator and tubing before ordering.

What's in the Box

-360 kit: 1 GPU block and 1 matching backplate-360-H kit: 2 GPU blocks and 2 matching backplatesEach kit: 1 × 360 mm radiator, pump, tubing, and 3 × 120 mm fans (25 mm thick)Mounting hardware and thermal pads

Both kits ship with the tubing connected and coolant already filled.

Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.

Installation & Use

1
Shut down the PC, remove the graphics card, and take off the stock cooler. Clean away old thermal paste and pad residue.
2
Trim the included thermal pads to fit the memory and power-stage areas shown. Apply your own GPU thermal paste to the GPU die.
3
Check that the mounting holes line up, then attach the block with the mounting hardware set for your kit. Stop if the holes do not line up. Fit the matching backplate supplied with each block.
4
Mount the radiator and fans at the case's 360 mm position. Route the tubing with room for the bends and the inline pump.
5
Follow the wiring instructions for your kit’s pump and fans. During the initial test, confirm that both are running and inspect the fittings for leaks.

Have your own GPU thermal paste ready. Check that the case has enough clearance for the radiator, fans, and tubing.

Bykski B-FRD-PT5090GK installation diagram with shaded memory and power-stage pads around the central GPU die

The shaded strips and squares mark the pad locations. Apply GPU thermal paste to the die in the center.

FAQ

Where is the pump on this RTX 5090 AIO cooler?

The pump sits in the tubing between the GPU block and the 360 mm radiator on the standard kit. Allow room for it when routing the hoses.

Will either 360 mm kit fit my case?

For either kit, check for a 360 mm radiator mount with clearance for the 396 mm radiator length and 63 mm combined radiator and fan thickness. Allow space at the hose end for tubing bends and the inline pump.

What does -H mean when choosing a kit?

B-FRD-PT5090GK-360-H serves two cards and includes two blocks and two matching backplates. B-FRD-PT5090GK-360 serves one card and includes one block and one matching backplate.

Which parts of the GameRock does the water block cool?

The cold plate cools the GPU die, memory, and power stages.

Notes
  • The case illustration shows one example of top-mounted radiator placement.

FormulaMod Official Store

Recent Reviews
+