Bykski
RTX 4090 AIO Liquid Cooler for AIC Reference PCB, Bykski B-FRD-RTX4090H, 360 mm
RTX 4090 AIO liquid cooler for the AIC reference PCB
The Bykski B-FRD-RTX4090H is a 360 mm all-in-one liquid cooler for the NVIDIA GeForce RTX 4090 24 GB with the AIC reference PCB. It replaces the stock cooler with a full-cover block that draws heat from the GPU, memory, and voltage regulators and carries it through tubing to a case-mounted radiator.
Compatibility
Manufacturer-confirmed PCB
- ✓NVIDIA GeForce RTX 4090 24 GB with AIC Reference PCB
Check the card’s exact PCB layout and mounting holes against Bykski’s bare-board photo before ordering.
Design Highlights
Radiator, pump, and block in one assembly
An inline pump moves coolant between the GPU block and the 360 mm radiator. The standard 360 mm assembly uses three radiator fans.
T2 copper cold plate
Bykski uses a T2 copper base with 0.3 mm jet microchannels. The cold plate draws heat from the GPU die and from the memory and voltage regulators through thermal pads.
Case-mounted radiator
Bykski shows the radiator above the graphics card. Check the space around the radiator mount and the tubing route to the GPU before you choose a mounting position.
Key Specifications
| Model | B-FRD-RTX4090H-360 (standard 360 mm assembly) |
|---|---|
| Heat pickup | GPU die, memory, and voltage regulators |
| Cold plate | T2 copper |
| Microchannels | 0.3 mm, up to 44 channels |
| GPU block footprint | Approx. 238.2 × 119.6 mm (Bykski drawing) |
| Radiator mounting class | 360 mm |
| Radiator material | Aluminum |
| Radiator coolant channels | 12 |
| Radiator length shown | 396 mm (Bykski 360 mm drawing) |
| Radiator fans | 3 on the standard 360 mm assembly |
| Pump | Inline |
Which Version Do I Need?
Choose by your card’s PCB. Bykski makes separate AIO kits for these RTX 4090 layouts.
What's in the Box
These are the main components of the standard 360 mm assembly.
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
Installation & Use
You’ll also need your own GPU thermal paste and a case with clearance for the 360 mm radiator and its fans.
FAQ
Do I need a separate pump or reservoir for this RTX 4090 AIO?
The included inline pump and tubing circulate coolant between the GPU block and radiator as one assembly.
Can I use this with a GeForce RTX 4090 Founders Edition?
Bykski specifies the AIC reference PCB for this kit. The Founders Edition uses NVIDIA’s own board design. Confirm fit with your exact PCB before ordering.
Will this fit a case with a 360 mm radiator mount?
Bykski’s 360 mm drawing shows a 396 mm radiator length. Check the usable length and depth at the mounting position, including space for the fan stack and tubing bends.
Does the block cool the memory as well as the GPU?
Yes. The cold plate covers the GPU die, and Bykski’s installation diagram shows thermal pads on the memory and voltage regulators.
- For any questions, please contact customer service.













