Bykski
ASUS RTX 4090 AIO Liquid Cooler (TUF Gaming OG / ROG Strix LC), Bykski B-FRD-AS4090TUFOG
360 mm AIO liquid cooler for ASUS RTX 4090 OG and Strix LC
The Bykski B-FRD-AS4090TUFOG is an all-in-one liquid cooler for select ASUS graphics cards, including the TUF Gaming GeForce RTX 4090 24GB OG. It replaces the stock cooler with a full-cover block that carries heat from the GPU, memory, and power stages to a case-mounted radiator. The single-card 360 mm kit described here includes an inline pump and three radiator fans.
Compatibility
Bykski lists these ASUS graphics cards for this cooler.
- ✓ASUS TUF Gaming GeForce RTX 4090 24GB OG (TUF-RTX4090-24G-OG-GAMING)
- ✓ASUS ROG Strix LC GeForce RTX 4090 24GB (ROG-STRIX-LC-RTX4090-24G-GAMING)
- ✓ASUS TUF Gaming GeForce RTX 4070 Ti SUPER 16GB OG OC Edition (TUF-RTX4070TIS-O16G-OG-GAMING)
Before ordering, check the exact model number on your card against the list. Use the TUF RTX 4090 OG photo as a PCB reference, then verify the mounting holes and component contact areas on your own card.
Design Highlights
A radiator and pump in one loop
Braided tubing connects the GPU block to the radiator, with the pump mounted inline. Three 120 mm fans move air through the radiator.
Copper contact plate across the board
The nickel-plated T2 copper plate draws heat from the GPU core, memory, and power stages. Bykski rates the copper base material at 401 W/(m·K).
0.3 mm jet microchannels
The cold plate has up to 44 narrow coolant channels that increase the contact area between the liquid and the copper.
Key Specifications
| Single-card SKU | B-FRD-AS4090TUFOG-360 |
|---|---|
| Cold plate | T2 copper with electroless nickel plating |
| GPU block (L × W × T) | 222.30 × 119.58 × 16.60 mm |
| Radiator | 360 mm aluminum, 396 mm overall length, 12 coolant channels |
| Radiator fans | 3 × 120 mm |
| Inline pump | 7,000 RPM, 450 L/h, 7 m head |
| Tubing | Braided |
| Thermal pads | 1.5 mm |
Which Version Do I Need?
Start with the model number on your card. Look for the OG suffix on the TUF RTX 4090 or the LC designation on the ROG Strix RTX 4090.
What’s in the Box — Single-Card 360 mm Kit
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
Installation & Use
You also need your own GPU thermal paste, a case with a 360 mm radiator mount, and suitable power connections for the pump and fans.
FAQ
Which ASUS RTX 4090 should I check for this AIO?
Look for the TUF Gaming 24GB OG or ROG Strix LC 24GB model number in the compatibility list. Match your PCB to the reference before you order.
Do I need a separate pump or a custom loop?
The single-card 360 mm kit includes the pump, tubing, radiator, and GPU block in one assembly.
Will the 360 mm radiator fit my case?
Check for a 360 mm radiator mount with room for the radiator’s 396 mm overall length. Allow additional depth for the fans and space to route the tubing to the GPU.
Where do the thermal pads go?
Use the 1.5 mm pads on the memory and power-stage contact areas shown in the installation diagram. Apply your own GPU thermal paste to the GPU die.
- Bykski lists speed, flow, and head as separate specifications for the pump.













