Bykski
RX 6700 XT Water Block - Bykski A-RX6700XT-X-V2 Full Cover with Backplate
Full-cover water block for select Radeon RX 6700 XT cards
The Bykski A-RX6700XT-X-V2 is a full-cover water block for the AMD Radeon RX 6700 XT reference PCB and the specific partner boards listed below. It replaces the stock cooler and transfers heat from the GPU core, memory, and voltage regulators to a custom liquid cooling loop. The kit includes a black aluminum backplate.
Compatibility
This block fits the following RX 6700 XT PCB layouts.
- ✓AMD Radeon RX 6700 XT (reference PCB)
- ✓Sapphire NITRO+ Radeon RX 6700 XT (Super Platinum)
- ✓Sapphire PULSE Radeon RX 6700 XT (Platinum Edition)
- ✓XFX Radeon RX 6700 XT (Overseas Edition / Global Version)
- ✓XFX Radeon RX 6700 XT Snow Wolf
- ✓Dataland Radeon RX 6700 XT God of War
For the AMD reference card, use the photo to compare the bare PCB. For partner cards, confirm the full card part number, PCB revision, and mounting-hole layout for your specific model. Confirm unlisted versions before ordering.
Design Highlights
Contact across the board
The nickel-plated T2 copper cold plate contacts the GPU core and reaches the memory and voltage regulator modules through thermal pads.
Microchannels over the GPU core
Coolant crosses the microchannel array above the GPU core. Bykski specifies 0.3 mm jet microchannels and up to 44 channels.
Key Specifications
| Model | Bykski A-RX6700XT-X-V2 |
|---|---|
| Cold plate | Nickel-plated T2 copper |
| Top | Clear acrylic |
| Backplate | Black aluminum |
| Lighting | 5V 3-pin addressable RGB (RBW) |
| Block (L × W × T) | 241.14 × 126.07 × 23.45 mm |
| Backplate (L × W × T) | 241.15 × 95.99 × 6.00 mm |
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
You also need a pump, radiator, tubing, matching fittings, and coolant.
FAQ
Will this water block fit my AMD Radeon RX 6700 XT?
It fits the AMD reference PCB and the partner boards listed above. Check your full card part number and PCB revision before ordering.
Which Sapphire RX 6700 XT cards fit?
Bykski lists the Sapphire NITRO+ (Super Platinum) and PULSE (Platinum Edition) layouts. Confirm your exact part number and PCB revision before ordering.
How do I connect the RBW lighting?
Check the connector and pin layout. Use a matching 5V RBW controller or a matching sync adapter for a 5V ARGB motherboard header. A 12V 4-pin RGB header can damage the lighting.
- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.
- The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.













