Bykski
MSI RTX 3080/3090 Ventus 3X OC Water Block with Backplate – Bykski N-MS3090VES-X-V2
Full-cover water block for MSI RTX 3080 and 3090 Ventus 3X OC
The Bykski N-MS3090VES-X-V2 replaces the stock cooler on the listed MSI GeForce RTX 3080 and RTX 3090 Ventus 3X OC cards. Its copper cold plate cools the GPU core, memory, and voltage regulators in a custom liquid cooling loop. The block comes with an aluminum backplate and 5V addressable RGB lighting.
Compatibility
Bykski lists these MSI GeForce cards for the V2 block.
- ✓MSI GeForce RTX 3080 Ventus 3X 10G OC
- ✓MSI GeForce RTX 3080 Ventus 3X 12G OC
- ✓MSI GeForce RTX 3090 Ventus 3X 24G OC
Before ordering, check your card’s full model name and confirm its PCB layout against Bykski’s compatibility information.
Design Highlights
Clear cover and G1/4 ports
The clear acrylic cover shows the coolant channels. G1/4 fittings connect the block to your loop at the inlet and outlet.
Jet microchannels over the GPU
Coolant passes through 0.5 mm gaps between the microchannel fins above the GPU core. The 9 mm copper cold plate also contacts the card’s memory and voltage regulator areas through thermal pads.
Key Specifications
| Model | N-MS3090VES-X-V2 |
|---|---|
| Cold plate | Electroplated T2 high-purity copper |
| Cold plate thickness | 9 mm |
| Microchannel gap | 0.5 mm |
| Top cover | Clear acrylic |
| Backplate | Black aluminum, passive |
| Block dimensions (L × W × T) | 259.90 × 138.45 × 26.25 mm |
| Inlet and outlet threads | G1/4 |
| Lighting | 5V addressable RGB (Bykski RBW) |
Which Version Do I Need?
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
You’ll also need a pump, radiator, G1/4 fittings that match your tubing, tubing, and coolant.
FAQ
Does this fit both the 10G and 12G MSI RTX 3080 Ventus 3X OC?
Bykski lists both the 10G OC and 12G OC models. Confirm the exact model and match its PCB layout before ordering.
What fittings does this block use?
The inlet and outlet use G1/4 threads. Choose G1/4 fittings sized for your tubing.
How do I connect the lighting to my motherboard?
Connect the RBW lighting to a compatible Bykski RBW adapter lead, then plug the lead’s motherboard end into a 5V 3-pin ARGB header. Never connect the lighting to a 12V 4-pin RGB header.
What else do I need to water-cool the card?
This is the GPU block for a custom loop. You’ll also need a pump, radiator, fittings, tubing, and coolant.
Does coolant run through the included backplate?
The included black aluminum backplate is passive. Coolant flows through the water block.
- This is a repair or replace only item. Returns not accepted on compatibility issues or if block has had water/fluid run through it.
- Manufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item. Product does NOT come with English instructions. Please see product gallery images for install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points with the exception of the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.
- Not responsible for any damage caused by or when using this product. Please use at your own risk.













