Bykski
DDR5 RAM Water Block with TFT Display – Barrowch FBRWB-PA4
DDR5 RAM water block with a TFT coolant display
The Barrowch FBRWB-PA4 adds desktop DDR5 memory to a custom liquid cooling loop. It mounts across the RAM cooling armors, which transfer heat from the memory modules to the block. Two G1/4 ports connect it to the loop, and the built-in TFT shows coolant temperature and accumulated power-on time.
Compatibility
Use one matching RAM cooling armor per memory module.
- ✓Desktop DDR5 RAM fitted with Barrowch FBRAMLD-01 cooling armors
Plan for two or four modules. If your RAM already has heat spreaders, remove them before installing the armors.
Check your motherboard’s recommended DIMM slots and the clearance above them for the block, fittings, and tubing.
Design Highlights
Coolant temperature at a glance
The TFT shows real-time coolant temperature and accumulated power-on time. A round lens sits over the square TFT panel.
Either port can serve as the inlet
Coolant flows through wide microchannels in the nickel-plated copper base. Use either G1/4 port as the inlet to suit your tubing route.
5V addressable lighting
The LRC 2.0 lighting shines through the clear acrylic chamber below the aluminum cover. Use a compatible Barrow LRC 2.0 controller or a compatible adapter for a 5V 3-pin motherboard ARGB header.
Key Specifications
| Model | FBRWB-PA4 |
|---|---|
| Block dimensions (L × W × H) | 138 × 42 × 18.50 mm |
| Ports | 2 × G1/4, either port can be the inlet |
| Port center spacing | 81.50 mm |
| Cold plate | Nickel-plated copper |
| Coolant chamber | Clear acrylic |
| Top cover | Aluminum alloy |
| Display | TFT, coolant temperature and accumulated power-on time |
| Lighting | Barrow LRC 2.0, 5V ARGB |
| Block colors | Black or white |
Which Version Do I Need?
What's in the Box
Each option is available with a black or white water block. The lighting controller is sold separately.
Installation & Use
Have your DDR5 modules, matching armors for a block-only order, thermal pads for the installation, two G1/4 fittings, and a compatible power connection ready. You also need a loop with a pump, radiator, tubing, and coolant.
FAQ
Can I use this block with desktop DDR5 RAM?
Yes. Fit each DDR5 module with a Barrowch FBRAMLD-01 cooling armor before mounting the block.
Which option includes the RAM cooling armors?
Kit A includes two armors and Kit B includes four. Just RAM block includes the block only.
What does the TFT screen show?
It shows the temperature of the coolant in the block and accumulated power-on time.
Which fitting thread and inlet should I use?
Both ports take G1/4 fittings. Either port can be the inlet, so choose the orientation that suits your tubing.
What lighting connection does it need?
Use a compatible Barrow LRC 2.0 controller or a compatible adapter to a 5V 3-pin ARGB motherboard header. The controller is sold separately.
Product Gallery
- Avoid pressing on the fragile TFT screen.
- In case of product appearance structure upgrade, without further notice, in kind prevail.

















