Barrowch FBSP17B, 17W PWM Intelligent Pump, OLED Digital Display, DDC Series, Manual And PWM Speed Control WaterCooling Pump

ATTENTION: Please follow the video method to inject the liquid into the block.

Put the block vertically and shake the block to exhaust the air out to avoid idling the engine.

Must Install a filter before water inlet to avoid pump clogging.

Both version come with a manual controller

Purchase information

1. The water blocks need to match with corresponding controllers before they can be used. When purchasing, please make sure to purchase the required controller; 2. Must install the filtration device before water blocks, avoid to clog water blocks; 3. When installing, please pay attention to the inlet and outlet position of water blocks, errors in installation will affect heat dissipation efficiency; 4. The water injection port must be connected to the hose before water injection; 5. Correctly use the inlet, outlet, and water injection ports to quickly complete the water injection operation; 6. When installing the water block, the fixing screws must be installed diagonally; 7. When installing, if the fitting interferes with the water pump due to the size of the fitting, it can be solved by adding a 20mm extension joint; 8. Product appearance structure will be upgraded without a prior notice, and the material object prevails.