• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Barrow

20mm PC Water Cooling Radiator, 240/360mm, G1/4 | Barrow Dabel-20a / Dabel-20b

stars, based on ( 0 ) review
items available
Contact Us
FormulaMod Official Store
Barrow · Dabel-20a / Dabel-20b

20 mm slim radiator for custom PC water cooling

The Barrow Dabel-20a and Dabel-20b are 20 mm thick radiators for custom PC water cooling loops with 240 mm or 360 mm radiator mounts. G1/4 ports connect the radiator to the loop, and 120 mm fans move air through the copper fins to remove heat from the coolant. The slim body leaves more room for fans in tight mounts.

Fits
240 or 360 mm radiator mounts
Body depth
20 mm
Ports
2 × G1/4
Fin density
16 FPI

Case and Fan Fit

Match the radiator size to your case mount and fan layout.

  • ✓240 mm radiator mount with two 120 mm fans in one row
  • ✓360 mm radiator mount with three 120 mm fans in one row

Check your case manual and allow clearance for the full radiator length, fan thickness, fittings, and tubing at the port end.

Barrow Dabel-20a 240 and Dabel-20b 240 plan and side drawing with overall dimensions and port spacing

Barrow’s 240 mm model drawing. Dimensions are in millimeters.

Design Highlights

Barrow Dabel-20b 360 black radiator showing its slim sidewall and both ports at one end

20 mm radiator body

The 240 mm and 360 mm versions have the same slim body depth. Use the overall dimensions below to check clearance before adding fans and fittings.

Barrow Dabel-20a and Dabel-20b exploded view of the copper fin and tube core, end tanks, and side rails

Single-wave copper fins

The core uses 14 flat copper tubes and single-wave copper fins. Air from the fans passes through the fins to carry heat away from the coolant.

Barrow Dabel-20a and Dabel-20b coolant path diagram with arrows showing flow out and back between the two end ports

Barrow’s diagram shows one possible flow direction.

Two ports at one end

Coolant travels along the core and back to the second port. Route your tubing from either G1/4 port as the inlet.

Key Specifications

White SKUsDabel-20a 240
Dabel-20a 360
Black SKUsDabel-20b 240
Dabel-20b 360
240 mm (L × W × T)274.1 × 120 × 20 mm
360 mm (L × W × T)394.1 × 120 × 20 mm
MaterialsCopper, brass, and stainless steel
Copper fins16 FPI · 18 mm fin height
Flat copper tubes14 per radiator. Each tube measures 233 × 2 × 13 mm in the 240, or 353 × 2 × 13 mm in the 360.
Coolant ports2 × G1/4 · 63.3 mm center to center
240 weight and capacity395.6 g · 117 mL
360 weight and capacity530.7 g · 153 mL
Test pressure0.32 bar
Barrow Dabel-20a 360 and Dabel-20b 360 plan and side drawing with overall dimensions and port spacing

Barrow’s 360 mm model drawing. Dimensions are in millimeters.

Which Version Do I Need?

Measure the space for the radiator and fans together before choosing a body thickness.

Dabel-20a / Dabel-20bTHIS PAGE
Choose the 20 mm body for a shallow mount. Select white (20a) or black (20b) in either radiator length.
Compare this 28 mm series if your mount has room for a deeper radiator body.

What's in the Box

1 × selected radiatorMounting hardware set and hex wrench.

Installation & Use

1
Clean the radiator with a dedicated radiator cleaner before first use.
2
Check the fit of the radiator, fans, and fittings in the case. Secure the radiator and fans with M3 screws suited to the thickness of your fan and bracket. A screw that reaches too far can puncture a coolant channel. Tighten only enough to secure the parts.
3
Connect both ports to the loop with G1/4 fittings that match your tubing. Either port can take the incoming coolant.
4
Fill the loop, bleed trapped air, and check for leaks before powering the PC hardware.
5
Clear dust from the fins periodically to maintain airflow.

You’ll also need 120 mm fans, G1/4 fittings, tubing, coolant, a pump, a reservoir, and the water blocks for your loop.

Barrow Dabel-20a and Dabel-20b installation diagram showing a fan screw seated above the coolant channel

Barrow’s fan mounting example shows where the screw should stop.

FAQ

What are the actual dimensions of the Barrow 240 mm and 360 mm radiators?

The 240 is 274.1 × 120 × 20 mm and the 360 is 394.1 × 120 × 20 mm. Allow extra clearance for the fans, fittings, and tubing.

How many 120 mm fans do I need?

For one row of fans, use two on the 240 mm model or three on the 360 mm model. Supply the fans separately.

Does it matter which G1/4 port I use as the inlet?

Either port can serve as the inlet. Use the other port for the return to the loop.

Which model is white?

Choose Dabel-20a for white or Dabel-20b for black. Both come in 240 mm and 360 mm sizes.

Notes
  • The factors of artificial damage (large-scale collapse of wave plates, water leakage caused by water channels being pierced by screws, etc.) are not within the scope of warranty.
  • In case of upgrading to the appearance and structure , no further notice, the real object shall prevail.

FormulaMod Official Store

Recent Reviews
+