Barrow
MSI RTX 4090 Suprim X / Gaming X Trio Water Block with Backplate, Barrow BS-MSG4090M-PA
Full-cover water block for MSI GeForce RTX 4090
The Barrow BS-MSG4090M-PA replaces the factory cooler on supported MSI GeForce RTX 4090 cards, including the SUPRIM X 24G, for use in a custom liquid cooling loop. Its copper cold plate draws heat from the GPU core, memory, and power delivery components. The included aluminum backplate mounts behind the board.
Compatibility
Barrow lists this block for these MSI card models.
- ✓MSI GeForce RTX 4090 SUPRIM X 24G
- ✓MSI GeForce RTX 4090 SUPRIM 24G
- ✓MSI GeForce RTX 4090 SUPRIM LIQUID X 24G
- ✓MSI GeForce RTX 4090 SUPRIM LIQUID 24G
- ✓MSI GeForce RTX 4090 GAMING X TRIO 24G
- ✓MSI GeForce RTX 4090 GAMING TRIO 24G
Barrow specifies a different block for the NVIDIA RTX 4090 Founders Edition. Before ordering, verify your exact card model and PCB layout.
Design Highlights
Cooling for the core, memory, and VRM
The cold plate covers the GPU core, memory modules, and power delivery components. Coolant carries heat from the plate into the rest of your loop.
43 jet microchannels
The microchannels in the GPU core area give the coolant more surface area to draw heat from the cold plate.
5V addressable lighting
Connect the lighting to a compatible Barrow LRC 2.0 controller. For motherboard sync, use a Barrow adapter cable and a 5V 3-pin ARGB header. A 12V 4-pin RGB header can damage the LEDs.
Key Specifications
| Model | BS-MSG4090M-PA |
|---|---|
| Block type | Full-cover GPU water block |
| Cold plate | Copper |
| Top | Clear acrylic |
| Backplate | Aluminum alloy, passive |
| Port thread | G1/4 inlet and outlet |
| Block size (L × W × max T) | 254.10 × 151.80 × 24 mm |
| Lighting | 5V Barrow LRC 2.0 ARGB |
Which Version Do I Need?
Match the block to your exact card model and PCB before choosing.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
For the loop, you also need G1/4 tubing fittings, matching tubing, a pump, a reservoir, a radiator with fans, and coolant.
FAQ
Does this water block fit the MSI RTX 4090 SUPRIM X and GAMING X TRIO?
Yes. Barrow lists both the SUPRIM X 24G and the GAMING X TRIO 24G. Match the exact model and PCB before ordering.
Which Barrow block fits the RTX 4090 Founders Edition?
Use the Barrow BS-NVG4090-PA for the NVIDIA GeForce RTX 4090 Founders Edition.
Can I sync the lighting with my motherboard?
Yes, with a compatible sync adapter cable and a 5V 3-pin ARGB header. The standard package does not include a sync adapter cable.
Does the included backplate need its own coolant connection?
The aluminum backplate is passive and mounts behind the PCB. Connect the loop to the water block.
What fittings do I need for the block?
Use G1/4 fittings sized for your tubing. The two included stop plugs close the unused ports.
- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.














