• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Barrow

Gigabyte RTX 3080 / 3080 Ti / 3090 Water Block, Barrow BS-GIG3090-PA2

stars, based on ( 0 ) review
0items available
Contact Us
FormulaMod Official Store
Barrow · BS-GIG3090-PA2

Water block for select Gigabyte RTX 3080, 3080 Ti and 3090 cards

The Barrow BS-GIG3090-PA2 is a full-cover GPU water block for select Gigabyte graphics cards, including the GeForce RTX 3080 VISION OC 10G (Rev. 1.0 and 2.0). Its copper cold plate transfers heat from the GPU die, memory, and power circuitry to a custom liquid cooling loop.

Fits
Select Gigabyte RTX 3080 / 3080 Ti / 3090
Cold plate
Copper
Ports
G1/4 inlet and outlet
Lighting
5V 3-pin ARGB

Compatibility

Barrow lists these Gigabyte GeForce PCB configurations for the BS-GIG3090-PA2 front block.

  • ✓RTX 3080 VISION OC 10G (Rev. 1.0)
  • ✓RTX 3080 VISION OC 10G (Rev. 2.0)
  • ✓RTX 3080 GAMING OC 10G (Rev. 1.0)
  • ✓RTX 3080 GAMING OC 10G (Rev. 2.0)
  • ✓RTX 3080 EAGLE OC 10G (Rev. 1.0)
  • ✓RTX 3080 EAGLE OC 10G (Rev. 2.0)
  • ✓RTX 3080 EAGLE 10G (Rev. 1.0)
  • ✓RTX 3080 EAGLE 10G (Rev. 2.0)
  • ✓RTX 3080 GAMING OC WATERFORCE WB 10G (Rev. 1.0)
  • ✓RTX 3080 Ti GAMING OC 12G
  • ✓RTX 3080 Ti VISION OC 12G
  • ✓RTX 3080 Ti EAGLE OC 12G
  • ✓RTX 3090 GAMING OC 24G
  • ✓RTX 3090 EAGLE OC 24G
  • ✓RTX 3090 EAGLE 24G
  • ✓RTX 3090 VISION OC 24G
  • ✓RTX 3090 TURBO 24G

Barrow lists a different block, BS-GIX3090-PA, for the AORUS RTX 3090 MASTER 24G (Rev. 1.0).

Before ordering, verify your exact card model and revision and compare the PCB layout with Barrow’s fit information.

Barrow BS-GIG3090-PA2 fit reference showing the silver Gigabyte RTX 3080 VISION OC 10G Rev. 2.0 card with three fans

Gigabyte RTX 3080 VISION OC 10G (Rev. 2.0). Check your PCB before ordering.

Design Highlights

Barrow BS-GIG3090-PA2 front water block with a clear acrylic top and side port terminal

Full-cover cold plate

The cold plate draws heat from the GPU die, memory, and power circuitry. The clear acrylic top lets you see the coolant path.

Barrow BS-GIG3090-PA2 close-up of the jet microchannel fins in the cold plate

43 microchannels over the GPU

Coolant flows through 0.5 mm grooves in the cold plate over the GPU die.

Barrow BS-GIG3090-PA2 clear acrylic GPU block lit in purple and blue with red fittings shown

Loop fittings shown for illustration.

LRC 2.0 addressable lighting

Use a compatible LRC 2.0 manual controller for the lighting. For motherboard control, use a separately sold 5V 3-pin ARGB adapter cable.

Key Specifications

Block modelBS-GIG3090-PA2
Cold plateCopper
TopClear acrylic
Cooling coverageGPU die, memory, and power circuitry
Port threadG1/4 inlet and outlet
Block length × width304.80 × 138.50 mm
Maximum height shown23.90 mm
LightingBarrow LRC 2.0, 5V 3-pin ARGB
Barrow BS-GIG3090-PA2 front water block dimensions in top and side views, including both height callouts

Barrow front-block drawing. Dimensions are in millimeters.

Which Version Do I Need?

Match the name on your card to the block made for its PCB.

Barrow BS-GIG3090-PA2THIS PAGE
Choose this front block for the Gigabyte card and revision listed above.
Choose this block for the NVIDIA GeForce RTX 3090 Founders Edition.
Choose this block for the Gigabyte GeForce RTX 3090 Ti GAMING OC 24G.

What's in the Box

1 × front GPU water block1 × manual lighting controller2 × G1/4 stop plugsMounting hardware setThermal pad set

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Turn off the system, remove the graphics card, and take off its original cooler.
2
Clean off the old thermal materials. Apply thermal paste to the GPU die and place the thermal pads where the memory and power components meet the block.
3
Align the block with the PCB and secure it with the mounting hardware. Check the fit before tightening the screws.
4
Check the inlet and outlet positions before connecting your tubing. Use G1/4 fittings and seal any unused ports with the stop plugs.
5
Check the completed loop for leaks before powering the graphics card.

For a complete loop, you also need tubing, matching G1/4 fittings, a pump, a reservoir, a radiator with fans, and coolant.

Barrow BS-GIG3090-PA2 general mounting diagram showing the front water block, GPU PCB, backplate, and screws

Barrow’s general mounting illustration. Verify the contact points and screw positions on your card.

FAQ

Does this fit my Gigabyte RTX 3080 VISION OC 10G?

Barrow lists both Rev. 1.0 and Rev. 2.0 for this block. Verify your card’s revision and PCB layout before ordering.

Does Barrow list the RTX 3080 Ti EAGLE OC 12G?

Barrow lists the Gigabyte GeForce RTX 3080 Ti EAGLE OC 12G. Check the exact model name on your card.

Can I reuse my card’s original backplate?

Yes. Barrow lists the front block as compatible with the original backplate on a supported card. The active water-cooled backplate is a separate accessory.

How do I connect the lighting to my motherboard?

Use a compatible 5V 3-pin ARGB adapter cable, sold separately, and align it with the header markings. A 12V RGB header can damage the lighting.

What fittings do I need?

Use G1/4 fittings sized for your tubing. The box includes stop plugs for unused ports.

Notes
  • This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
  • The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
  • Not responsible for any damage caused by or when using this product. Please use it at your own risk.

FormulaMod Official Store

Recent Reviews
+