• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Astralcooler

RTX 6000 Ada Water Block with Backplate | Astralcooler AC-GB-NV6000-Ada

stars, based on ( 0 ) review
$230.80 piece
items available
Contact Us
FormulaMod Official Store
Astralcooler · AC-GB-NV6000-Ada

Full-cover water block for the RTX 6000 Ada

The Astralcooler AC-GB-NV6000-Ada is a full-cover water block for the NVIDIA RTX 6000 Ada Generation 48GB PCIe graphics card. It replaces the factory air cooler so you can connect the card to a custom liquid cooling loop. The T2 copper cold plate transfers heat from the GPU core, memory, and power circuitry to the coolant.

Fits
RTX 6000 Ada / RTX 5880 Ada
Cold plate
T2 oxygen-free copper
Block size
287 × 120 × 21 mm
Loop type
Custom liquid cooling

Compatibility

Astralcooler lists these graphics cards.

  • ✓NVIDIA RTX 6000 Ada Generation, 48GB PCIe
  • ✓NVIDIA RTX 5880 Ada Generation, 48GB PCIe

Before ordering, verify your exact card model and match its PCB layout, including the mounting holes and component positions, to the drawing.

PNY RTX 6000 Ada with its factory blower cooler above the Astralcooler AC-GB-NV6000-Ada bare PCB outline

PNY RTX 6000 Ada with its factory cooler, above. Astralcooler’s PCB drawing, below.

Design Highlights

Astralcooler AC-GB-NV6000-Ada cold plate with a central fin array and surrounding coolant channels

Cooling for the core, memory, and power circuitry

The cold plate draws heat from the GPU core, memory, MOSFETs, inductors, and tantalum capacitors. Coolant passes through up to 176 jet microchannels with grooves in their bases.

Astralcooler AC-GB-NV6000-Ada exploded view with the cover, cold plate, and separate black backplate

Separate backplate

The backplate sits behind the PCB. Its mounting screws are separate from the spring screws that secure the block.

Key Specifications

ModelAC-GB-NV6000-Ada
ConstructionFull-metal coverage with a separate backplate
Cold plateT2 oxygen-free copper
Copper thermal conductivity401 W/m·K, as specified by Astralcooler
Copper plate length157 mm
Jet microchannelsUp to 176
Block assembly (L × H × T)287 × 120 × 21 mm
Backplate (L × H × T)178 × 97 × 3.14 mm
Astralcooler AC-GB-NV6000-Ada dimension drawing of the block assembly and separate backplate

Astralcooler’s dimension drawing shows the block above and the backplate below. Measurements are in millimeters.

Which Version Do I Need?

Check the full model name on your card first. RTX A6000 is an Ampere model. Once you’ve confirmed your Ada card, choose the cooling setup that suits your build.

Astralcooler AC-GB-NV6000-AdaTHIS PAGE
Choose this standalone water block and backplate if you already have a custom loop or want to choose your own loop components.
Choose the all-in-one cooler for an RTX 6000 Ada or RTX 5880 Ada if you want the block, pump, radiator, fans, and tubing in one kit.
Compare this separate Bykski water block and backplate for the RTX 6000 Ada if you’re building a custom loop. Check the PCB photo in its product gallery.

What's in the Box

1 × full-cover GPU water block1 × backplate

Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.

Installation & Use

1
Power off the system, remove the graphics card, and take off the stock cooler. Clean away the old thermal paste and pads.
2
Astralcooler’s assembly guide specifies five 1.5 mm thermal pads. Use the drawing to position the pads on the matching memory and power components, then apply your own GPU thermal paste to the GPU core.
3
Align the block, PCB, and backplate. The assembly guide specifies M2 × 7 mm spring screws for the block and M2 × 8 mm screws for the backplate. Tighten them evenly.
4
Connect the block to your loop using fittings that match the block ports and your tubing.
5
Fill the loop with coolant and test for leaks with the GPU unpowered. Power the card only after the loop passes the leak test.

You also need a pump, a reservoir or pump-reservoir combo, a radiator with fans, tubing, matching fittings, and coolant.

Astralcooler AC-GB-NV6000-Ada numbered installation drawing showing the block, thermal pads, PCB, screws, and backplate

1 water block assembly · 2 thermal pads · 3 graphics card PCB · 4 spring screws · 5 backplate · 6 backplate screws

FAQ

How are the RTX 6000 Ada and RTX 5880 Ada cooled from the factory?

Both ship with active air cooling. This block lets you transfer the card’s heat to the radiator in a custom liquid cooling loop.

Do I need a separate pump?

Yes. Use a pump or pump-reservoir combo in your custom loop.

Is RTX 6000 Ada the same as RTX PRO 6000 Blackwell?

RTX 6000 Ada is an Ada Generation card. NVIDIA lists RTX PRO 6000 Blackwell in Workstation, Server, and Max-Q Workstation editions. Check the full name on your card against the compatibility list above.

How do I check if it fits in my case?

The block assembly measures 287 × 120 × 21 mm. Compare the dimension drawing with the available space, then allow room for your fittings and tubing bends.

What thermal pad thickness does Astralcooler specify?

The assembly guide calls for 1.5 mm pads. Use the drawing to check their placement.

Notes
  • Check your radiator mounting space and plan the tubing route before taking the card apart.

FormulaMod Official Store

Recent Reviews
+