Bykski RGV-PHA-PK515E-P Water Channel Board/Radiator Water Channel Board [Compatible with Phanteks PK515E Case]

Bykski RGV-PHA-PK515E-P Water Channel Board/Radiator Water Channel Board [Compatible with Phanteks PK515E Case]

TL;DR: The RGV-PHA-PK515E is a case-specific PMMA distribution plate that mounts inside the Phanteks Eclipse PH-ES515ETG chassis, replacing a separate pump-reservoir and routing the loop through milled channels with G1/4 ports for the CPU and GPU branches. An optional integrated DDC pump (62 x 62 x 58mm,...

Common Applications

The RGV-PHA-PK515E is a case-specific PMMA distribution plate that mounts inside the Phanteks Eclipse PH-ES515ETG chassis, replacing a separate pump-reservoir and routing the loop through milled channels with G1/4 ports for the CPU and GPU branches. An optional integrated DDC pump (62 x 62 x 58mm, 12V with PWM, 4-pin Molex plus PWM header, up to 600 L/H and 6m head, 5000 RPM max) bolts to the back of the plate, allowing the entire loop to be powered from the plate itself. A pre-installed 5V 3-pin addressable RBW LED strip lights the channels and ties into the motherboard ARGB header. The plate supports radiators up to 30mm thick in the case and works with aluminum or non-aluminum loops as configured.

Frequently Asked Questions

Q: Which case is this distribution plate designed for?

A: Phanteks Eclipse PH-ES515ETG only.

Q: What lighting standard does the plate use?

A: 5V 3-pin addressable RBW LED strip, compatible with standard motherboard ARGB headers.

Q: Does it ship with a pump?

A: The plate is offered in three SKUs: no pump, with DDC pump and aluminum armor, or with DDC pump and LCD display.

Q: What radiator thickness does it support?

A: Radiators up to 30mm thick fit within the case clearance when the plate is installed.

Q: Are 12V 4-pin RGB strips compatible?

A: No. The plate is wired for 5V 3-pin ARGB; plugging it into a 12V 4-pin RGB header will damage the LEDs.