Bykski RGV-INW-TOU1 — In Win TOU1.0 Distro Plate

Bykski RGV-INW-TOU1 — Distro Plate for In Win TOU1.0 Case

Quick answer: Bykski RGV-INW-TOU1 is a custom-engineered acrylic distro plate (also known as a waterway board) for the In Win TOU1.0 Case. Replaces traditional soft-tube routing inside the chassis with a single front-facing acrylic waterway. Designed for single-GPU loops with Intel CPU water block. Lighting: RBW 5v 3pin 12V 4pin RGB.

Why this distro plate fits In Win

In Win chassis are known for unconventional layouts — the 303 series uses an inverted-tower design, while the 915 and 905 emphasize tempered-glass visibility. Routing a custom loop through a pre-engineered acrylic waterway lets you keep that showcase aesthetic without dozens of soft-tube bends inside the chassis.

Manufacturer notes (from original spec)

Please pay attention to this product is only compatible with corresponding case, may not be compatible with other cases. Waterway Board only compatible suitable for single GPU building 6.

Specifications

• SKU: RGV-INW-TOU1
• Brand: Bykski
• Material: acrylic
• Compatible case: In Win TOU1.0 Case
• Loop topology: single-GPU
• CPU platform: Intel CPU
• Lighting: RBW 5v 3pin 12V 4pin RGB
• Notes from original spec: 12v 4pin; 5v 3pin

Compatibility notes (inherited from original spec)

The following references appear in the original product specification and are preserved here for reference. Distro plates do not directly interface with motherboards — verify your specific build configuration before relying on these mentions.

• Brand mentions in original spec: Intel
• Related part: B-PMD3-COV
• Related part: B-PMD3-X

What it replaces

Traditional soft-tube routing inside the In Win TOU1.0 Case. The waterway is pre-engineered into the acrylic plate — no bend work needed. The result is a clean front-panel showcase loop with a fixed, predictable flow path.

FAQ

Is "distro plate" the same as "waterway board"?

Yes — same product category. "Distro plate" is the term widely used in the international PC water-cooling community; "waterway board" is the original manufacturer term. You may see both used interchangeably.

Does it come with a pump, fittings, or coolant?

No. The plate ships as the acrylic distro plate only. Pump, G1/4 fittings, soft tube (or hard tube), and coolant are sold separately.

What lighting headers does it support?

RBW 5v 3pin 12V 4pin RGB. Plug into the matching motherboard header — no separate controller required for the supported header type.

Will this fit other versions of the In Win?

This plate is engineered specifically for the In Win TOU1.0 Case. Different revisions of the same chassis line may have different mounting points; verify your case version before ordering.

Last updated: 2026-05