Bykski B-NVME-SL M.2 water block, acrylic hard drive water block

Bykski B-NVME-SL M.2 water block, acrylic hard drive water block

TL;DR: The B-NVME-SL is a full-cover water block for M.2 NVMe SSDs in the 2280 and 22110 form factors. The top is clear PMMA acrylic for visibility into the internal flow channel, and the cold plate is electroplated copper to contact the SSD controller and NAND through the supplied thermal pad. Two G1/4...

Common Applications

The B-NVME-SL is a full-cover water block for M.2 NVMe SSDs in the 2280 and 22110 form factors. The top is clear PMMA acrylic for visibility into the internal flow channel, and the cold plate is electroplated copper to contact the SSD controller and NAND through the supplied thermal pad. Two G1/4 ports on the top allow the block to be plumbed inline with the rest of the loop using any standard fitting. The block clamps to the SSD with the included bottom mounting plate and screws, supporting single- and double-sided NVMe drives within the rated thickness.

Frequently Asked Questions

Q: Which M.2 SSDs fit the B-NVME-SL?

A: M.2 NVMe drives in 2280 and 22110 form factors. The block does not fit shorter 2230/2242/2260 drives.

Q: What materials make up the block?

A: Clear PMMA acrylic top, electroplated copper cold plate, and a stainless mounting plate. The block ships with thermal pad and fixing screws.

Q: Does it have RGB?

A: No. The B-NVME-SL is a passive clear acrylic block with no LED channel.

Q: What ports does it use?

A: Two G1/4 threaded ports for standard PC water cooling fittings, allowing inline placement anywhere in the loop.

Q: Can I use it with an aluminum radiator?

A: It is safest to keep the loop all-copper. Mixing copper blocks like this with aluminum radiators causes galvanic corrosion and pitting over time, even with inhibitor coolants.