Barrowch FBHKN-3/8-THICK G1/4 Compression Fitting for 10x16 mm (3/8 in ID, 5/8 in OD) Soft Tubing

Barrowch FBHKN-3/8-THICK G1/4 Compression Fitting for 10x16 mm (3/8 in ID, 5/8 in OD) Soft Tubing

TL;DR: The FBHKN-3/8-THICK is a G1/4 compression fitting sized for 10x16 mm soft tubing - the thicker-wall 3/8 in ID by 5/8 in OD format. The body is plated brass and an o-ring on the male thread seals against any G1/4 port. The outer collar uses a diamond knurl pattern for grip and a textured anti-slip...

Common Applications

The FBHKN-3/8-THICK is a G1/4 compression fitting sized for 10x16 mm soft tubing - the thicker-wall 3/8 in ID by 5/8 in OD format. The body is plated brass and an o-ring on the male thread seals against any G1/4 port. The outer collar uses a diamond knurl pattern for grip and a textured anti-slip ring that bites the tube wall. This part is for 5/8 in OD tubing only; the matching THIN variant (FBHKN-3/8-THIN) is for 1/2 in OD tubing of the same 3/8 in ID.

Frequently Asked Questions

Q: What tubing does it fit?

A: 10x16 mm soft tubing, which is 3/8 in ID and 5/8 in OD.

Q: How is it different from the THIN version?

A: Both take 3/8 in ID tubing, but THICK is built for 5/8 in OD thicker-wall tubing while THIN is for 1/2 in OD. The compression ring sizes are different and the two are not interchangeable.

Q: What is the thread?

A: G1/4, compatible with every standard PC water-cooling block, pump and reservoir.

Q: What is the body material?

A: Plated brass.

Q: Does it include the tubing?

A: No. Fitting only - the 10x16 mm soft tubing is sold separately.