Barrowch FBHKN-3/8-THIN G1/4 Compression Fitting for 10x13 mm (3/8 in ID, 1/2 in OD) Soft Tubing

Barrowch FBHKN-3/8-THIN G1/4 Compression Fitting for 10x13 mm (3/8 in ID, 1/2 in OD) Soft Tubing

TL;DR: The FBHKN-3/8-THIN is a G1/4 compression fitting sized for 10x13 mm soft tubing - the 3/8 in ID by 1/2 in OD format. The body is plated brass and an o-ring on the male thread seals against any G1/4 water-cooling port. The outer collar uses a diamond knurl pattern for grip and a textured anti-slip...

Common Applications

The FBHKN-3/8-THIN is a G1/4 compression fitting sized for 10x13 mm soft tubing - the 3/8 in ID by 1/2 in OD format. The body is plated brass and an o-ring on the male thread seals against any G1/4 water-cooling port. The outer collar uses a diamond knurl pattern for grip and a textured anti-slip ring that bites the tube so it cannot back out under pump pressure. This is the THIN (1/2 in OD) variant; the THICK part number FBHKN-3/8-THICK takes 5/8 in OD tubing of the same 3/8 in ID.

Frequently Asked Questions

Q: What tubing size does this fitting use?

A: 10x13 mm soft tubing, which is 3/8 in ID and 1/2 in OD.

Q: How is it different from the THICK version?

A: THIN takes 3/8 in ID by 1/2 in OD tubing; THICK takes 3/8 in ID by 5/8 in OD tubing. The compression ring is sized for the OD, so they are not interchangeable.

Q: What thread is the port side?

A: G1/4, the universal PC water-cooling thread.

Q: What is the body made of?

A: Plated brass.

Q: Will it work with EPDM or Tygon tubing?

A: Yes. Any soft tubing measuring 3/8 in ID x 1/2 in OD will fit, regardless of material brand.