Barrow TDWT90-v2.5 Dazzle Series G1/4 90 Degree Male-to-Female Rotary Adapter, 360 Rotation Brass Fitting

Barrow TDWT90-v2.5 Dazzle Series G1/4 90 Degree Male-to-Female Rotary Adapter, 360 Rotation Brass Fitting

TL;DR: The TDWT90-v2.5 is a brass 90-degree male-to-female adapter from the Dazzle series, used to change direction in a custom water cooling loop without bending tubing. One G1/4 male thread screws into a block, pump or reservoir port, and the G1/4 female end rotates a full 360 degrees so the outgoing...

Common Applications

The TDWT90-v2.5 is a brass 90-degree male-to-female adapter from the Dazzle series, used to change direction in a custom water cooling loop without bending tubing. One G1/4 male thread screws into a block, pump or reservoir port, and the G1/4 female end rotates a full 360 degrees so the outgoing fitting can be aimed at any angle around the axis. The body uses a rotating o-ring seal so it can be repositioned after the loop is filled. Common uses include routing soft or hard tubing around a motherboard, bridging two blocks at a right angle, and saving space in a chassis where a straight fitting would clash with a sidewall.

Frequently Asked Questions

Q: What thread does it use?

A: G1/4 on both ends, male on one side and female on the other.

Q: Can the angle be repositioned after install?

A: Yes. The 90-degree spout rotates a full 360 degrees on a sealed o-ring, so you can reaim it without breaking the loop.

Q: What material is it?

A: Brass body with a plated surface finish; the Dazzle series ships in colors such as silver, gold, and white.

Q: Is this the same as TWT90-v2.5?

A: TDWT is the male-to-female extender; TWT is the male-to-male variant. Pick TDWT to extend an existing male fitting outward at 90 degrees.

Q: How many are in a pack?

A: Multi-packs of four are standard at major retailers; single-piece listings also exist.