Barrow BSDQT-PA Multifunctional Acrylic L-Type 90-Degree GPU Block Bridge / Direction-Change Module, G1/4

Barrow BSDQT-PA Multifunctional Acrylic L-Type 90-Degree GPU Block Bridge / Direction-Change Module, G1/4

TL;DR: The BSDQT-PA is a small acrylic and copper bridge module that bolts onto the inlet/outlet pads of Barrow GPU water blocks. It replaces the default straight-through ports with an L-shaped waterway, which lets you route tubing 90 degrees toward the side of the case instead of straight out the top, or...

Common Applications

The BSDQT-PA is a small acrylic and copper bridge module that bolts onto the inlet/outlet pads of Barrow GPU water blocks. It replaces the default straight-through ports with an L-shaped waterway, which lets you route tubing 90 degrees toward the side of the case instead of straight out the top, or bridge two adjacent GPU blocks together for a cleaner multi-card loop. All four ports are G1/4 threaded, so any standard fitting works. The package ships with the bridge body, O-rings, mounting screws, a hex wrench and four stop plugs so unused ports can be sealed off.

Frequently Asked Questions

Q: Which water blocks is the BSDQT-PA compatible with?

A: Barrow-brand GPU water blocks only. The screw spacing and port pads are sized for Barrow's pattern.

Q: What thread size does it use?

A: G1/4 on all ports.

Q: Does it ship with stop plugs?

A: Yes, four G1/4 stop plugs are included so unused outlets can be sealed.

Q: What is in the box besides the bridge?

A: The bridge body, replacement O-rings, mounting screws, a hex wrench and four stop plugs.

Q: Will it work with a Barrow GPU block plus a different brand's block?

A: No. Both blocks must be Barrow because the mounting pattern is brand-specific.